GO-SKU-12: PCIe 5.0 x16 to 2x/4x MCIO (8i) Passive Bifurcation Adapter Card
Ultra-Low-Loss Megtron 6 Host BIOS Bifurcation Riser Card for Short-Reach Gen5 MCIO Looms
Cost-optimized passive PCIe Gen5 x16 bifurcation adapter card designed for server motherboards with native BIOS PCIe bifurcation support (x4x4x4x4 or x8x8) and total channel paths within the host CPU insertion-loss budget (< 0.65m harness length). Fabricated on genuine Panasonic Megtron 6 ultra-low-loss laminate with precision 85-ohm differential microstrip routing and 30-microinch gold-plated edge fingers.
المواصفات الكهربائية والبصرية والميكانيكية
| المعامل الهندسي | المواصفة الفنية المعتمدة |
|---|---|
| Host Interface | PCIe Gen5 x16 edge connector (requires motherboard BIOS x4x4x4x4 or x8x8 bifurcation) |
| Downstream Ports | 2x MCIO 8i (SFF-TA-1016 74-pin) or 4x MCIO 4i/8i low-profile right-angle/vertical headers |
| PCB Dielectric Material | Panasonic Megtron 6 (R-5775) ultra-low-loss high-frequency laminate (Df < 0.004 @ 16 GHz) |
| Differential Impedance | 85 Ohms +/- 5% controlled via factory TDR coupon verification per PCB panel |
| Insertion Loss (Card Only) | < 2.1 dB at 16 GHz Nyquist frequency from gold finger to MCIO receptacle |
| Sideband Signal Routing | Hardware jumper / DIP selectable PERST#, WAKE#, CLKREQ#, and SMBus address mapping |
| Bracket Options | Ships with both Full-Height (120mm) and Low-Profile (80mm) vented stainless brackets |
| Operating Temperature | -10 C to +85 C continuous industrial and data-center ambient rating |
سلامة الإشارة واختبارات التشغيل المسبق وفحص الجودة في هونغ كونغ
- 100% netlist continuity, hi-pot isolation, and batch TDR 85-ohm impedance trace verification on every production panel.
- 40x optical inspection of 30u" gold-finger bevelchamfers and SFF-TA-1016 SMT solder joints.
- Kitted with custom-length GO-SKU-01..05 MCIO harnesses and sideband pinout map verified for Supermicro, ASUS, Gigabyte, and ASRock Rack BIOS profiles.
ضوابط التصدير والامتثال التنظيمي والشحن غير الخطر Non-DG
EAR99 passive printed circuit assembly; Non-DG (zero batteries, HS 8507.60 excluded); FCC Part 15 sub-assembly exempt; RoHS 3 & UL 94-V0 compliant.
بنيات الأنظمة المستهدفة وحالات الاستخدام
- Compact 1U/2U NVMe storage servers splitting a single x16 slot into four Gen5 x4 U.2 or E3.S SSD bays
- Industrial edge AI vision boxes (Bundle B3) interfacing high-speed frame grabbers or NVMe scratch disks
- Emergency hot-standby spare pools (Bundle B8) for regional colocation and HPC cluster maintenance
الحزم المتكاملة المتوافقة
Bundle B3: No-RF / Non-DG Industrial Edge Vision & AI Inspection Kit
نطاق السعر الاسترشادي FOB / FCA Hong Kong: $4,600 – $5,300 USD / Kit
Bundle B8: Kwun Tong Consignment Spare Pool & 48h Emergency Continuity Kit
نطاق السعر الاسترشادي FOB / FCA Hong Kong: $2,200 – $2,800 USD / Pool
الأسئلة الشائعة للتأهيل الهندسي والمشتريات
When should our engineering team select GO-SKU-12 (passive) vs GO-SKU-11 (active retimer)?
If your motherboard BIOS supports x4x4x4x4 bifurcation and your MCIO harness length is under 0.5m–0.65m with a direct backplane connection, GO-SKU-12 saves $300+ per slot. For longer runs (>0.7m), riser hops, or higher-loss backplanes, select GO-SKU-11.
Is GO-SKU-12 sold standalone or kitted with cables?
GO-SKU-12 is kitted with custom-length MCIO harnesses (MOQ 10 sets) under FCA Hong Kong, FOB Hong Kong, or DAP Buyer-IOR terms to ensure sideband PERST#/CLKREQ# polarity matches your target backplane.