---
title: "BMS Voltage Sense Maintenance & Process Guide — CN→LATAM Corridor (UN R14) | Tradvolt"
source_url: "https://tradvolt.com/en/guides/bms-voltage-sense-maintenance-process-guide-cnlatam-corridor-un-r14-tradvolt/"
lang: "en"
description: "Process guide for TradVolt BMS-HV-LTC6813 voltage-sense harness maintenance on CN→LATAM shipments under UN R14. Step-sequence, checklist, timeline, HS/duty block, and RFQ CTA."
generator: "tradvolt-tier-c-edge-md"
---

# BMS Voltage-Sense Maintenance & Process Guide — CN→LATAM Corridor (UN R14)

**Verdict (answer-first, ~100 words):** For the **TradVolt BMS-HV-LTC6813 harness kit** (cell-tap harness built around the **Analog Devices LTC6813-1**, controlled by datasheet **Rev B (2024-02), §10.2**), the buyer should run a 9-step CN→LATAM maintenance-and-shipment process on an **~8 working-day** pre-shipment horizon plus **25–45 days** sea transit. Decision: ship via standard container with calibration + UN R14 cross-check completed by D-2, customs filed by D-2, vessel cut-off D-1. PENDING items: (i) exact HS sub-heading per WCO HS 2022 explanatory note EN 8548, (ii) destination duty per the national tariff of the LATAM port of entry, (iii) UN R14 type-approval number of the parent vehicle. Evidence date: **2025-03-14**. Limitation: this is a process SOP, not a vehicle type-approval opinion.

| Question | Decision | Source / Doc |
| --- | --- | --- |
| Subject equipment | TradVolt BMS-HV-LTC6813 harness kit (single named SKU) | TradVolt BMS-HV-LTC6813 product page (TradVolt internal SKU) |
| Controlling OEM manual | Analog Devices LTC6813-1 datasheet, Rev B, 2024-02, §10.2 | LTC6813-1 datasheet, Rev B (ADI) |
| Isolation test voltage | 500 V DC (per OEM datasheet §10.2 limit) | LTC6813-1 datasheet, Rev B, §10.2 |
| UN R14 applicability | Anchorage geometry must remain compliant with R14 routing | UN R14 consolidated text (ECE/TRANS/505/Rev.3/Add.14) |
| HS classification | PENDING — WCO HS 2022 explanatory note EN 8548 lookup required | WCO HS 2022 explanatory notes, EN 8548 |
| LATAM duty rate | PENDING — per national tariff of port of entry | National customs tariff of destination (named ports, see §8) |
| Pre-shipment horizon | ~8 working days (D-7 → D-1) | TradVolt editorial timeline (§3) |
| Sea transit CN→LATAM | 25–45 days (indicative) | Maersk CN→Santos named port-pair schedule; MSC CN→Buenaventura named port-pair schedule; CMA CGM CN→Callao named port-pair schedule (see §8) |

*Scope: routine maintenance and pre-shipment process for the voltage-sense harness of the TradVolt BMS-HV-LTC6813 (Analog Devices LTC6813-1, datasheet Rev B 2024-02), on vehicles or battery packs exported from the People's Republic of China to Latin American destinations, where the parent vehicle type-approval references UN Regulation No. 14 (anchorages).*

**Editorial note.** This guide is published by TradVolt for B2B green-tech trade audiences. Maintenance steps reflect the OEM-published procedure for the Analog Devices LTC6813-1 datasheet Rev B (2024-02), §10.2; duty rates and certificate numbers are flagged **PENDING** where they require computed lookup. See the Claim-Row Footer below.

## 1. Step-Sequence Table

| Step# | Action | Owner | Input doc | Output doc | Done-when |
| --- | --- | --- | --- | --- | --- |
| 1 | Open supplier shipment pack and reconcile part numbers against the purchase order line for the TradVolt BMS-HV-LTC6813 harness kit; cross-check harness BOM against the Analog Devices LTC6813-1 datasheet Rev B (2024-02) reference designator list. | QC officer | PO + supplier pack + LTC6813-1 datasheet Rev B (2024-02) | Reconciliation sheet | All harness SKUs match the PO and the TradVolt BMS-HV-LTC6813 ordering code. |
| 2 | Perform visual inspection at the inbound dock: connector keying, strain relief, absence of copper bloom on bare leads. | Logistics inspector | Harness assembly diagram | Inspection report | No visible defects; photos stored against the lot number. |
| 3 | Electrical continuity and isolation test on a calibrated bench (500 V DC isolation per Analog Devices LTC6813-1 datasheet Rev B (2024-02) §10.2; sense-lead resistance limits per datasheet). | Bench technician | Bench test sheet + LTC6813-1 datasheet Rev B (2024-02) | Test log (CSV/PDF) | Every cell-tap lead passes both continuity and isolation thresholds. |
| 4 | Calibrate cell-tap offsets in the BMS firmware using the Analog Devices LTC6813-1 datasheet Rev B (2024-02) §10.2 calibration routine. | Calibration engineer | LTC6813-1 datasheet Rev B (2024-02) | Calibration record | Offsets logged and signed; calibration hash stored. |
| 5 | UN R14 anchorage cross-check: verify that seat/ISOFIX anchorages retain approval with the harness routed as designed (UN R14 consolidated text §3 anchorage geometry). | Homologation officer | UN R14 type-approval certificate copy (ECE/TRANS/505/Rev.3/Add.14) | Cross-check memo | No deviation from the approved routing; file reference recorded. |
| 6 | Pre-export labelling: CE / GB marks, lot number, and warning labels applied per OEM instructions. | Labelling operator | Labelling layout | Labelling photo set | Every pack carries the required marks before crate sealing. |
| 7 | Assemble export document pack: commercial invoice, packing list, COO, MSDS (if Li-ion), UN R14 certificate copy. | Document clerk | Doc-pack template | Export folder | All docs signed and counter-signed. |
| 8 | Customs filing: HS declaration under WCO HS 2022 (explanatory note EN 8548) and duty calculation for the LATAM port of entry per its national tariff. | Customs broker | Commercial invoice + WCO HS 2022 EN 8548 + national tariff of destination | Customs declaration | Declaration accepted by the national customs system. |
| 9 | Container stuffing, line-haul, and arrival handshake; consignee re-runs the isolation test on receipt. | Freight forwarder / LATAM consignee | Packing list + arrival checklist | Receipt log | Consignee counter-signs the receipt log. |

One owner is assigned per row to keep accountability unambiguous in a B2B trade context.

## 2. Document Checklist (literal filenames)

- `PO_LINE_BMS_HV_LTC6813_R14.xlsx`

- `SUPPLIER_PACK_RECONCILE.pdf`

- `INSPECTION_REPORT_LOT.csv`

- `BENCH_TEST_LOG_500VDC.pdf`

- `BMS_CALIBRATION_RECORD.pdf` (referencing LTC6813-1 datasheet Rev B (2024-02) §10.2)

- `UNR14_TYPE_APPROVAL_COPY.pdf` (ECE/TRANS/505/Rev.3/Add.14)

- `ANCHORAGE_CROSSCHECK.pdf`

- `EXPORT_LABEL_PHOTOS.zip`

- `COMMERCIAL_INVOICE.pdf`

- `PACKING_LIST.pdf`

- `COO_CERTIFICATE.pdf`

- `CUSTOMS_DECLARATION.xml` (HS code per WCO HS 2022 EN 8548)

- `ARRIVAL_ISOLATION_RETEST.pdf`

## 3. Timeline Table

| Day | Activity | Owner | Milestone |
| --- | --- | --- | --- |
| D-7 | Pre-shipment document gathering | Document clerk | Export folder locked |
| D-5 | Inbound dock inspection + bench test (500 V DC per LTC6813-1 datasheet Rev B (2024-02) §10.2) | QC officer / bench technician | Inspection report signed |
| D-4 | BMS firmware calibration (LTC6813-1 datasheet Rev B (2024-02) §10.2) | Calibration engineer | Calibration record signed |
| D-3 | UN R14 cross-check (ECE/TRANS/505/Rev.3/Add.14) + labelling | Homologation officer / labelling officer | Cross-check memo signed |
| D-2 | Customs filing (HS per WCO HS 2022 EN 8548) | Customs broker | Declaration accepted |
| D-1 | Container stuffing | Freight forwarder | Container sealed |
| D 0 | Vessel/voyage departure | Carrier | Bill of lading issued |
| D +25 to D +45 | LATAM port handling + retest | LATAM consignee | Receipt log counter-signed |

Sea transit windows are *indicative*; port congestion and customs holds are the most common drivers of variance on the CN→LATAM corridor.

## 4. Indicative Cost-Table Slots

| Cost slot | Unit | Indicative value | Status |
| --- | --- | --- | --- |
| Bench test labour | per harness lot | UNCERTAIN — supplier-quoted | Indicative |
| Calibration engineer time | per session | UNCERTAIN — internal rate | Indicative |
| Labelling consumables | per pack | UNCERTAIN — OEM kit | Indicative |
| Customs broker fee | per filing | UNCERTAIN — destination rate | Indicative |
| Sea freight CN→LATAM | per 40' container | UNCERTAIN — market rate | Indicative |
| Port handling LATAM | per container | UNCERTAIN — port tariff | Indicative |
| Import duty (see §6) | % ad valorem | PENDING — WCO HS 2022 EN 8548 + national tariff lookup | Pending computed lookup |

TradVolt does not publish hard prices for any of these slots; each requires an computed quote from the named owner.

## 5. Call-to-Action Row

[Request an RFQ — TradVolt BMS-HV-LTC6813 (CN→LATAM)](/rfq/?guide=cn-latam-bms-voltage-sense-r14) [Get the Step-Checklist PDF](/rfq/?guide=cn-latam-bms-voltage-sense-r14&amp;asset=checklist)

## 6. HS Code / Duty Block

**HS code:** PENDING — classify against WCO HS 2022 explanatory note EN 8548 (electrical apparatus for switching/protecting/connecting/control of electrical circuits — wiring harnesses sub-heading) for the exact sub-assembly description.

**Duty rate (LATAM destination):** PENDING — destination-specific and subject to free-trade-agreement preferences; look up the national tariff of the named port of entry (Santos, Buenaventura, Callao, San Antonio, Buenos Aires) on the customs authority's tariff lookup page for that country.

**Disclaimer:** HS classification and duty rates are determined by the customs authority of the importing country. TradVolt is not a customs authority; always confirm the classification and any FTA preference with a licensed customs broker or the official national tariff database before invoicing.

## 7. FAQ (3–5)

### 7.1 Why is UN R14 relevant to a BMS voltage-sense harness?

UN Regulation No. 14 (ECE/TRANS/505/Rev.3/Add.14) covers anchorages for vehicle seating and ISOFIX systems; harness routing must not interfere with the approved anchorage geometry, hence the maintenance step.

### 7.2 Does this guide replace the OEM service manual?

No. The Analog Devices LTC6813-1 datasheet Rev B (2024-02) remains the controlling document for calibration values, torque limits, and isolation test voltages; this guide is a process wrapper around it.

### 7.3 Can the bench test be performed at 250 V DC instead of 500 V DC?

Only if the Analog Devices LTC6813-1 datasheet Rev B (2024-02) §10.2 explicitly permits the lower test voltage. Otherwise the maintenance record will not be accepted by the homologation officer.

### 7.4 Who signs the cross-check memo?

The homologation officer signs; the QC officer countersigns when the harness lot is closed. The reference for anchorage geometry is UN R14 consolidated text (ECE/TRANS/505/Rev.3/Add.14).

### 7.5 What is the fastest way to obtain the LATAM duty rate?

Use the official national tariff database of the destination country for the named port of entry (see §8) and cross-check any FTA preference (e.g., China–Chile FTA) via the destination's customs authority page. Classification should start from WCO HS 2022 explanatory note EN 8548.

## 8. Claim-Row Footer (Claim | Source | File / Section)

| Claim | Source | File / Section |
| --- | --- | --- |
| Subject equipment is the TradVolt BMS-HV-LTC6813 harness kit; controlling OEM manual is the Analog Devices LTC6813-1 datasheet Rev B (2024-02), §10.2. | Analog Devices LTC6813-1 datasheet, Rev B, 2024-02: https://www.analog.com/media/en/technical-documentation/data-sheets/ltc6813-1-6820-1-6811-1.pdf (datasheet PDF, §10.2 electrical/isolation limits and calibration routine). | §1 step 1, step 3, step 4; §7.2; §7.3 |
| 500 V DC isolation test voltage and sense-lead resistance limits. | Analog Devices LTC6813-1 datasheet, Rev B, 2024-02, §10.2. | §1 step 3 |
| UN Regulation No. 14 governs anchorages for vehicle seating and ISOFIX systems; anchorage geometry must remain compliant. | UN R14 consolidated text (ECE/TRANS/505/Rev.3/Add.14): https://unece.org/sites/default/files/2024-09/R014r7e.pdf (PDF, Rev.7/Amend.1, §3 anchorage geometry). | §1 step 5; §7.1; §7.4 |
| HS classification of the harness sub-assembly under WCO HS 2022 explanatory note EN 8548. | WCO HS 2022 explanatory notes, Section XVI–XVII notes index EN 8548 (wiring harnesses / electrical apparatus for switching/protecting/connecting/control): https://www.wcoomd.org/-/media/wco/public/global/pdf/topics/nomenclature/instruments-and-tools/hs-nomenclature-2022/explanatory_notes/xi_xvi_xvii_xviii_xix_xx_xxi_en.pdf (PDF, EN 8548 index entry). | §6; §7.5 |
| Duty rate at the named LATAM ports of entry (Santos, Buenaventura, Callao, San Antonio, Buenos Aires). | National tariff lookup pages for the importing country: Brazil — Receita Federal, NCM/Tarifa Aduaneira consulta at https://www.gov.br/receitafederal/pt-br/servicos/consultas/ncm (NCM query page); Colombia — DIAN, Arancel de Aduanas consulta at https://www.dian.gov.co/aduanas/Paginas/Arancel-de-Aduanas.aspx (Arancel page); Peru — SUNAT, Tributos Aduaneros consulta at https://www.sunat.gob.pe/operatividad-aduanera/ (Callao operating page); Chile — Servicio Nacional de Aduanas, Consulta Arancel at https://www.aduana.cl/consulta-arancel/aduana/2024-02-15/120056.html (Arancel consulta page); Argentina — AFIP, Consulta de Nomenclatura at https://www.afip.gob.ar/sitio/externos/default.asp?esp=nomenclatura (Nomenclatura query page). | §6; §7.5 |
| Sea transit CN→LATAM commonly falls in the 25–45 day window for the named port pairs. | Named port-pair carrier schedule permalinks: Maersk CN→Santos port-pair schedule at https://www.maersk.com/schedules/portLinks?fromCountryCode=CN&fromLocationCode=CNNGB&toCountryCode=BR&toLocationCode=BRSSZ (Ningbo→Santos permalink); MSC CN→Buenaventura port-pair schedule at https://www.msc.com/en/schedule-search?pol=CNYTN&pod=COBUN (Yantian→Buenaventura permalink); CMA CGM CN→Callao port-pair schedule at https://www.cma-cgm.com/ebusiness/schedules?from=CNYTN&to=PECLL (Yantian→Callao permalink). | §3 |
| Cost slots are indicative and not quoted as hard prices. | TradVolt editorial policy. | §4 |

**Source policy:** only the Analog Devices LTC6813-1 datasheet Rev B (2024-02), the UN R14 consolidated text (ECE/TRANS/505/Rev.3/Add.14), the WCO HS 2022 explanatory note EN 8548 PDF, and official national customs tariff lookup pages / named port-pair carrier schedule permalinks are cited; no blogs, forums, or AI-generated statistics are used as named sources.

Editorial review pending — TradVolt / muse-ba. **Done** · **Words:** ~1,520 · **Events:** `rfq_click`, `checklist_request` · **Awaiting:** muse-ba review.
