---
title: "Combiner-Busbar Torque Maintenance Process: CN→US Solar Logistics Guide | Tradvolt"
source_url: "https://tradvolt.com/en/guides/combiner-busbar-torque-maintenance-process-cnus-solar-logistics-guide-tradvolt/"
lang: "en"
description: "Process-control reference for combiner-box busbar torque verification on the China to US solar equipment corridor, scoped to Sungrow CombinerBox P6 / Huawei SmartACU2000 / Sungrow SG125HT string-inverter-family OEM manuals."
generator: "tradvolt-tier-c-edge-md"
---

# Combiner-Busbar Torque Maintenance Process for CN→US Solar Shipments

**Slug:** /guides/cn-us-combiner-busbar-torque-r14/ | **Status:** Process-control reference, scoped | **Indexing:** noindex, nofollow (internal reference) | **Evidence date:** 2026-09-22

**Verdict (process-control reference, not a torque table):** For PV combiner-boxes shipped on the China → US corridor, this procedure is scoped to the Sungrow CombinerBox P6 family (primary scope; Sungrow string-inverter OEM, datasheet revision confirmed at RFQ), with the Huawei FusionSolar SmartACU2000 and the combiner block supplied with the Sungrow SG125HT C&I 3-phase string inverter as alternative-scoped references. All numeric torque values (Nm), megohmmeter test voltages, insulation-resistance (MΩ) thresholds, warm-up windows, and thermal ΔT acceptance bands are *OEM-defined* in the specific installation-manual revision for the combiner family in use and must be re-read at Step 2; this document deliberately omits the numbers and is a sequencing + evidence template only. The sequence spans ~21 days, D+0 (CN pre-shipment) to D+21 (US commissioning release). Equipment class: PV string combiner-box, MV/LV side. Location: US warehouse (Steps 1–3) → US project site (Steps 4–10). Horizon: one shipment, one intake.

| Parameter | Value / Decision |
| --- | --- |
| Equipment class | PV string combiner-box, MV/LV side |
| Primary OEM family (scope) | Sungrow CombinerBox P6 (datasheet + installation-manual revision recorded at Step 2) |
| Alternative-scoped families | Huawei FusionSolar SmartACU2000 combiner; combiner block supplied with Sungrow SG125HT C&I 3-phase string inverter |
| Location | US warehouse (Steps 1–3) → US project site (Steps 4–10) |
| Horizon | D+0 → D+21 (~21 days end-to-end per shipment) |
| Numeric torque, IR threshold, megohmmeter voltage, warm-up window, thermal ΔT band | OEM-dependent — **not stated in this reference**; pulled from OEM datasheet + installation-manual revision at Step 2 |
| Safety basis (LOTO) | OSHA 29 CFR 1910.147 (Control of Hazardous Energy / Lockout-Tagout) |
| Safety basis (qualified-person work) | OSHA 29 CFR 1910.269 + NFPA 70E (latest edition in force at site) |
| Calibration basis | ISO/IEC 17025:2017 accredited lab certificate for torque wrench, megohmmeter, thermal camera |
| Document type | Process-control reference, not a torque table; not a substitute for the OEM manual |

**Scope statement (read first):** This procedure is written for the Sungrow CombinerBox P6 family as primary scope (Sungrow string-inverter OEM, datasheet/PDF product pages JS-rendered — manual revision confirmed at RFQ). For Huawei FusionSolar SmartACU2000 combiner shipments or for combiner blocks supplied with the Sungrow SG125HT C&I 3-phase string inverter, replace the Sungrow P6 manual reference with the Huawei SmartACU2000 or SG125HT-family combiner manual revision at Step 2. Torque values (Nm), bolt-grade/tolerance, megohmmeter test voltage, minimum insulation-resistance (MΩ) threshold, warm-up window, and thermal ΔT acceptance band are all defined by the combiner-box OEM for the specific family + manual revision in use. This page intentionally omits those numbers; field teams must extract them from the OEM datasheet and installation-manual revision supplied with each shipment.

## 1. Step-Sequence Table

| Step# | Action | Owner | Input doc | Output doc | Done-when |
| --- | --- | --- | --- | --- | --- |
| 1 | Receive shipment at US warehouse; photograph pallet and crate condition | US Warehouse Lead | CN-US Bill of Lading; OEM Packing List | TradVolt-SHIP-INSPECT-r14.pdf | Pallet photos archived and SKU count matches packing list |
| 2 | Open the OEM datasheet & installation manual for the specific combiner family in use — Sungrow CombinerBox P6 (primary scope) or Huawei SmartACU2000 or SG125HT-family combiner (alternative scope) — and extract specified busbar torque (Nm), megohmmeter test voltage, MΩ minimum, warm-up window, and thermal ΔT band; record manual revision | QA Engineer | Sungrow CombinerBox P6 installation manual (current rev); OR Huawei SmartACU2000 installation manual; OR SG125HT-family combiner block manual; OEM datasheet (family-specific) | Torque-Reference-Extract.xlsx (with manual-revision column) | Every busbar joint has an OEM-specified Nm value, test voltage, MΩ threshold, warm-up window, and ΔT band recorded against family+manual revision |
| 3 | Verify torque wrench, megohmmeter, and thermal-camera calibration certificate validity and range coverage | QA Engineer | Calibration Certificates (ISO/IEC 17025:2017 accredited lab) for wrench, megohmmeter, thermal camera | Calibration-Check-Log-r14.csv | Calibration is current and instrument ranges cover the OEM-specified values with margin |
| 4 | De-energize, isolate, and apply lockout-tagout on each combiner before opening | Site Electrician (qualified per OSHA 29 CFR 1910.269 / NFPA 70E) | OSHA 29 CFR 1910.147 LOTO procedure; Site Single-Line Diagram | LOTO-Permit-r14.pdf | Zero voltage confirmed at the DC disconnect with a rated tester before any cover removal |
| 5 | Visually inspect busbar stack for discoloration, deformation, loose hardware | QA Engineer | Torque-Reference-Extract.xlsx (Step 2) | Visual-Inspection-Report-r14.pdf | Each joint classified as PASS / REPAIR / REPLACE |
| 6 | Apply OEM-specified torque to each busbar bolt using a star/cross pattern, in two passes | Site Electrician | Torque-Reference-Extract.xlsx; OEM Installation Manual (current rev) | Torque-Applied-Log-r14.csv | Every bolt reaches the OEM Nm within the OEM-stated tolerance in two passes |
| 7 | Apply torque witness marks; record actual torque, technician, wrench serial, timestamp | QA Engineer | Torque-Applied-Log-r14.csv (Step 6) | Torque-Verification-Log-r14.pdf | Witness marks intact and every joint has a logged reading |
| 8 | Run insulation resistance (megohmmeter) test across busbar-to-ground path at the OEM test voltage | Site Electrician | OEM Installation Manual (Step 2); Megohmmeter Calibration Certificate (ISO/IEC 17025:2017 accredited lab) | IR-Test-Report-r14.pdf | Measured MΩ meets or exceeds the OEM-stated minimum at the OEM-stated test voltage |
| 9 | Re-energize string; after the OEM warm-up window, thermal-scan busbar joints | QA Engineer | Thermal Camera Calibration Certificate; OEM warm-up window (Step 2) | Thermal-Scan-Report-r14.pdf | ΔT across joints is within the OEM-stated acceptance band |
| 10 | Archive all logs, IR scans, and witness photos to project folder; release for commissioning | Project Manager | All Step 1–9 outputs | Commissioning-Release-r14.pdf | Folder archived to project DMS and release signed off |

## 2. Document Checklist

Use the following literal filenames when archiving the combiner-busbar torque process into the project document management system:

- TradVolt-SHIP-INSPECT-r14.pdf

- Torque-Reference-Extract.xlsx (must include OEM family + manual-revision column)

- Calibration-Check-Log-r14.csv

- LOTO-Permit-r14.pdf

- Visual-Inspection-Report-r14.pdf

- Torque-Applied-Log-r14.csv

- Torque-Verification-Log-r14.pdf

- IR-Test-Report-r14.pdf

- Thermal-Scan-Report-r14.pdf

- Commissioning-Release-r14.pdf

## 3. Timeline Table

| Day | Activity | Owner | Notes |
| --- | --- | --- | --- |
| D+0 | CN port of export; OEM pre-shipment inspection (Sungrow / Huawei) | OEM / CN Freight Forwarder | Pre-shipment torque audit is OEM responsibility; OEM pre-shipment report archived |
| D+12 to D+18 | Ocean transit Shanghai / Ningbo → US West Coast port | CN-US Ocean Carrier | Container vibration profile is not asserted here; model assumption for documentation purposes |
| D+18 to D+19 | US port drayage and customs clearance | US Customs Broker | See HS / Duty block below |
| D+19 | Receipt at US warehouse; Step 1 inspection | US Warehouse Lead | Photograph crates on arrival |
| D+20 | Steps 2–3: OEM datasheet review and instrument calibration check | QA Engineer | Before any field activity |
| D+20 | Steps 4–7: De-energize, inspect, apply torque, mark & log | Site Electrician + QA Engineer | Field execution window |
| D+21 | Steps 8–10: IR test, thermal scan, commissioning release | Site Electrician + QA Engineer + PM | Folder archive to DMS |

## 4. Cost-Table (Indicative Slots Only)

**Important:** All figures below are labeled *indicative* slots only. Actual labor rates, calibration costs, ocean freight, and customs brokerage fees must be confirmed with current vendor quotations and US CBP rulings. Anything not directly sourced to a named document is marked UNCERTAIN.

| Line item | Indicative slot (USD) | Status |
| --- | --- | --- |
| OEM pre-shipment torque audit fee (per combiner) | Slot A — indicative | UNCERTAIN — confirm with Sungrow / Huawei OEM |
| Ocean freight CN → US West Coast (per 40HQ) | Slot B — indicative | UNCERTAIN — carrier quote required |
| US customs brokerage & ISF filing | Slot C — indicative | UNCERTAIN — broker quote required |
| US warehousing & inbound handling (per pallet) | Slot D — indicative | UNCERTAIN — warehouse quote required |
| Torque wrench calibration (annual ISO/IEC 17025:2017 accredited) | Slot E — indicative | UNCERTAIN — accredited lab quote required |
| Megohmmeter rental or calibration | Slot F — indicative | UNCERTAIN — equipment vendor quote required |
| Thermal imaging camera rental | Slot G — indicative | UNCERTAIN — equipment vendor quote required |
| Field electrician labor (per hour) | Slot H — indicative | UNCERTAIN — prevailing-wage lookup required |
| QA engineer labor (per hour) | Slot I — indicative | UNCERTAIN — prevailing-wage lookup required |
| Document control & archival overhead | Slot J — indicative | UNCERTAIN — internal cost allocation |

## 5. HS / Duty Block

**Disclaimer:** The Harmonized Tariff Schedule classification, Section 301 list status, and any applicable antidumping/countervailing duty orders below are PENDING verification. Final duty owed is determined by US Customs and Border Protection at the time of entry. Always confirm with a licensed customs broker and the latest CBP rulings before shipping.

| Field | Value (PENDING) |
| --- | --- |
| Likely HTS subheading for solar combiner boxes | 8541.40.9500 — PENDING CBP confirmation |
| Section 301 (China-origin) list status | PENDING — verify current USTR Section 301 China tariff-actions list (Four-Year Review page linked below) |
| Antidumping / Countervailing duty applicability | PENDING — confirm no AD/CVD order covers this HTS |
| De minimis (Section 321) eligibility | PENDING — depends on shipper / consignee and value |
| Recommended lookup resources | - USITC Harmonized Tariff Schedule search (lookup tool) - US Customs and Border Protection home (deep trade-topic pages moved 2024–25 — verify current paths before citing) - USTR Section 301 China tariff actions — Four-Year Review - US International Trade Administration |

## 6. Reference Equipment & Document Anchors (named scope, lookup only)

The procedure is scoped to the Sungrow CombinerBox P6 family (primary) with the Huawei FusionSolar SmartACU2000 combiner and the combiner block supplied with the Sungrow SG125HT C&I 3-phase string inverter as alternative-scoped references. OEM product pages are JavaScript-rendered; specific datasheet-PDF URLs are not asserted here because they are bot-walled. The family + manual-revision must be confirmed at RFQ against the OEM document supplied with the shipment, and recorded in Torque-Reference-Extract.xlsx.

| OEM | Family / model (scope of this page) | OEM site (lookup) | Datasheet / doc anchor (lookup) |
| --- | --- | --- | --- |
| Sungrow | **CombinerBox P6** — primary scope | sungrowpower.com/en | Sungrow CombinerBox P6 datasheet (PDF, current rev) — JS-rendered product page; datasheet-PDF URL confirmed at RFQ against shipment paperwork |
| Sungrow | SG125HT C&I 3-phase string inverter (alternative-scope reference for the combiner block supplied with this inverter family) | Sungrow string inverter range | SG125HT datasheet (PDF, current rev) — confirmed at RFQ against shipment paperwork |
| Huawei FusionSolar | **SmartACU2000** — alternative scope | solar.huawei.com/en | Huawei SmartACU2000 installation manual (PDF, current rev) — confirmed at RFQ against shipment paperwork |
| Huawei FusionSolar | SCharger-22KT-S0 Smart Charger (adjacent class, 22 kW 3-phase PV-preferred EV charger — context only, not in combiner scope) | Huawei SCharger-7KS-S0 / SCharger-22KT-S0 product page | SCharger-22KT-S0 datasheet — JS-rendered; confirmed at RFQ |
| SMA | Sunny Tripower CORE1 33-US / 50-US / 62-US (adjacent C&I inverter class — context only) | SMA Sunny Tripower CORE1 product page | Sunny Tripower CORE1 datasheet (PDF, current rev) — confirmed at RFQ |
| Enphase | IQ8P Microinverter (adjacent module-level class — context only) | Enphase IQ8P product page | IQ8P datasheet — confirmed at RFQ |
| Fronius | Primo GEN24 Plus / Symo / Tauro / Verto (adjacent string/hybrid class — context only) | Fronius GEN24 Plus page \| Fronius Symo \| Fronius Tauro \| Fronius Verto | Fronius family datasheets — confirmed at RFQ |
| CATL (ESS-side) | ESS enclosure families (adjacent class, for context only) | catl.com/en/ess/ | JS-rendered; specific ESS enclosure datasheet confirmed at RFQ |
| EVE Energy | ESS cell/enclosure families (adjacent class, for context only) | evebattery.com/en | JS-rendered; specific cell/enclosure datasheet confirmed at RFQ |
| Growatt | String inverter + combiner accessories (adjacent class) | growatt.com | JS-rendered; specific model datasheet confirmed at RFQ |
| LONGi / JinkoSolar / Trina Solar | Module-side (adjacent class — PV mounting via K2 Systems) | LONGi \| JinkoSolar \| Trina Solar | Module datasheets — confirmed at RFQ |
| K2 Systems | CrossRail System (US pitched/flat-roof rail family) and N-Rack / S-Rack ground-mount family (mounting-system context only) | K2 CrossRail System \| K2 N-Rack | JS-rendered; rail/kit manual revision confirmed at RFQ |

## 7. Standards & Reference Documents (exact designations + specific URLs)

- OSHA 29 CFR 1910.147 — Control of Hazardous Energy (Lockout/Tagout) — [OSHA 29 CFR 1910.147 eCFR page](https://www.osha.gov/laws-regs/regulations/standardnumber/1910.147) (exact OSHA standard page)

- OSHA 29 CFR 1910.269 — Electric Power Generation, Transmission, and Distribution — [OSHA 29 CFR 1910.269 eCFR page](https://www.osha.gov/laws-regs/regulations/standardnumber/1910.269) (exact OSHA standard page)

- NFPA 70E — Standard for Electrical Safety in the Workplace (latest edition in force at site) — NFPA codes-and-standards catalogue; edition/year recorded in Torque-Reference-Extract.xlsx

- ISO/IEC 17025:2017 — General requirements for the competence of testing and calibration laboratories — [ISO standards search (ISO/IEC 17025:2017)](https://www.iso.org/search.html?q=17025) (bot-walled — cite ISO number + title + year in text)

- IEC 61215-1:2021 ed2 — Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1: Test requirements (TC 82) — [IEC 61215-1:2021 webstore page](https://webstore.iec.ch/en/publication/61345) (adjacent module qualification)

- IEC 61730-1:2016 ed2 — Photovoltaic (PV) module safety qualification — Part 1: Requirements for construction (TC 82) — [IEC 61730-1:2016 webstore page](https://webstore.iec.ch/en/publication/25674) (adjacent module safety construction)

- IEC 61730-1:2023 ed3 — Photovoltaic (PV) module safety qualification — Part 1: Requirements for construction (TC 82) — [IEC 61730-1:2023 webstore page](https://webstore.iec.ch/en/publication/59803) (current ed.)

- IEC 62109-1:2010 — Safety of power converters for use in photovoltaic power systems — Part 1: General requirements (TC 82) — [IEC 62109-1:2010 webstore page](https://webstore.iec.ch/en/publication/6470)

- IEC 62109-2:2011 — Safety of power converters for use in photovoltaic power systems — Part 2: Particular requirements for inverters (TC 82) — [IEC 62109-2:2011 webstore page](https://webstore.iec.ch/en/publication/6471)

- IEC 62446-1:2016 — Photovoltaic (PV) systems — Requirements for testing, documentation and maintenance — Part 1: Grid connected systems (TC 82) — [IEC 62446-1:2016 webstore page](https://webstore.iec.ch/en/publication/24057) (commissioning/maintenance doc basis)

- IEC 62548-1:2023 — Photovoltaic (PV) arrays — Part 1: Design requirements (TC 82) — [IEC 62548-1:2023 webstore page](https://webstore.iec.ch/en/publication/64171)

- UL 61730-1 — Photovoltaic (PV) Module Safety Qualification — Part 1 — [shopulstandards UL 61730-1 product page](https://www.shopulstandards.com/ProductDetail.aspx?productId=UL61730-1)

- UL 1973 — Batteries for Use in Stationary and Motive Auxiliary Power Applications — [shopulstandards UL 1973 product page](https://www.shopulstandards.com/ProductDetail.aspx?productid=UL1973)

- IEC 62619:2022 ed2 — Safety requirements for secondary lithium cells and batteries for use in industrial applications incl. stationary/ESS (TC 21/SC 21A) — [IEC 62619:2022 webstore page](https://webstore.iec.ch/en/publication/64073) (adjacent ESS context)

- IEC 62485-5:2020 — Safety requirements for secondary batteries and battery installations — Part 5: Safe operation of stationary lithium-ion batteries (TC 21) — [IEC 62485-5:2020 webstore page](https://webstore.iec.ch/en/publication/29086)

- UN Manual of Tests and Criteria (UN 38.3 lithium-battery provisions; ST/SG/AC.10/11/Rev.7) — [UNECE Manual of Tests and Criteria page](https://unece.org/transport/dangerous-goods/un-manual-tests-and-criteria) (canonical UN page; bot-walled — cite full designation in text)

- Incoterms® 2020 (ICC) — [ICC Incoterms 2020 official rules page](https://iccwbo.org/business-solutions/incoterms-rules/incoterms-2020/)

- ISPM 15 (wood packaging) — [IPPC ISPM standards list](https://www.ippc.int/en/core-activities/standards-setting/ispms/)

- IATA Dangerous Goods Regulations (DGR) — [IATA DGR programme page](https://www.iata.org/en/programs/cargo/dgr/)

- NFPA 855 — Standard for the Installation of Stationary Energy Storage Systems — [NFPA 855 standard-development page](https://www.nfpa.org/codes-and-standards/nfpa-855-standard-development/855) (adjacent ESS context)

- Clean Energy Council approved-batteries list (AU, Battery Safety Guide compliance) — [CEC approved-batteries list](https://cleanenergycouncil.org.au/industry-programs/products-program/batteries) (adjacent reference)

## 8. FAQ

- **1. Where does the torque value come from?**:  From the OEM datasheet and installation manual supplied with the shipment, for the specific combiner-box family in use (Sungrow CombinerBox P6 primary scope; Huawei SmartACU2000 or Sungrow SG125HT-family combiner block alternative scope). Never use generic or third-party torque tables in place of OEM documentation. If the OEM manual is missing, request a replacement from the OEM before proceeding.

- **2. Why is a torque witness mark used?**:  A torque witness mark (paint stripe or similar) provides a visual cue that a fastener has been checked and tightened. Any subsequent movement of the mark indicates the joint may have shifted in transit or under thermal cycling.

- **3. Can thermal scanning replace physical torque verification?**:  No. Thermal scanning after energization is a secondary confirmation that joints are carrying current evenly; it does not prove the mechanical torque is correct. Both Step 7 (mechanical verification) and Step 9 (thermal scan) are required.

- **4. What if the insulation resistance test fails?**:  Stop work, isolate the combiner, and escalate to the OEM after-sales channel. Do not energize. A failure may indicate moisture ingress, damaged insulation, or a busbar-to-enclosure clearance issue.

- **5. Is this guide a substitute for NFPA 70E or OSHA training?**:  No. Personnel performing Steps 4–9 must hold the electrical qualifications required by OSHA 29 CFR 1910.269 and NFPA 70E for the voltage class being worked on. This guide is a process-control reference, not a safety training document.

- **6. Why are no numeric torque / IR / thermal ΔT values stated on this page?**:  Because every one of those numbers is OEM-defined and varies by combiner-box family and manual revision (Sungrow CombinerBox P6 / Huawei SmartACU2000 / Sungrow SG125HT-family combiner block). Stating generic numbers on a process reference risks field teams applying them to a different family than the one intended. Step 2 explicitly requires extracting and recording the family-specific values, plus the manual revision, from the OEM datasheet and installation manual supplied with the shipment.

- **7. How long does the full intake process take?**:  Approximately 21 calendar days from CN pre-shipment (D+0) to US commissioning release (D+21), assuming normal ocean transit (D+12 to D+18) and standard US port clearance (D+18 to D+19). Actual transit time varies by carrier, port pair, and customs hold; treat the day numbers as a model assumption, not a guarantee.

## 9. Call to Action

Ready to scope the CN→US combiner-busbar torque process for your next shipment? [Request RFQ](/rfq/)

**Note:** The RFQ button fires a `dataLayer` event (`cta_rfq_click`) for analytics wiring by the implementation team.

## 10. Claim-Row Footer (Claim | Source URL | File/section)

| # | Claim | Source (URL) | File / Section |
| --- | --- | --- | --- |
| 1 | Lockout-tagout is required before opening an energized combiner for maintenance | OSHA 29 CFR 1910.147 eCFR page | Step 4; LOTO-Permit-r14.pdf |
| 2 | Torque values for busbar joints must come from the OEM datasheet and installation manual for the specific combiner-box family in use | Sungrow CombinerBox P6 installation manual (current rev); OR Huawei SmartACU2000 installation manual; OR Sungrow SG125HT-family combiner block manual — confirmed at RFQ against shipment paperwork; OEM landing: sungrowpower.com/en \| solar.huawei.com/en | Step 2; Torque-Reference-Extract.xlsx |
| 3 | Torque wrench, megohmmeter, and thermal-camera calibration must be traceable to an ISO/IEC 17025:2017 accredited lab | ISO/IEC 17025:2017 (ISO standards search) | Step 3; Calibration-Check-Log-r14.csv |
| 4 | Insulation-resistance test is performed with a megohmmeter at a test voltage and MΩ minimum defined by the OEM for the family in use | OEM installation manual (family-specific) at Step 2; PV commissioning/maintenance standard: IEC 62446-1:2016 webstore page | Step 8; IR-Test-Report-r14.pdf |
| 5 | US Customs duty owed is determined by CBP at the time of entry | US Customs and Border Protection home (deep trade-topic pages moved 2024–25 — verify current paths before citing) | HS / Duty Block |
| 6 | HTS subheading lookup must be performed on the official USITC HTS database | USITC Harmonized Tariff Schedule search | HS / Duty Block / Lookup resources |
| 7 | Section 301 list applicability for China-origin goods is determined by USTR | USTR Section 301 China tariff actions — Four-Year Review | HS / Duty Block |
| 8 | Personnel performing electrical work must hold OSHA 29 CFR 1910.269 / NFPA 70E qualifications | OSHA 29 CFR 1910.269 eCFR page + NFPA 70E (latest edition in force) | FAQ #5; Step 4 |
| 9 | Vibration profile during ocean transit varies by container stack position | Treated as a model assumption; no direct OEM or carrier source cited — UNCERTAIN | Timeline table — D+12 to D+18 |
| 10 | Thermal ΔT acceptance band for busbar joints is OEM-defined for the specific family in use | OEM installation manual (family-specific) at Step 2; commissioning reference: IEC 62446-1:2016 webstore page | Step 9 — OEM value recorded in Thermal-Scan-Report-r14.pdf |
| 11 | End-to-end intake process spans approximately D+0 to D+21 | Model assumption — TradVolt process reference; UNCERTAIN against any specific carrier schedule | Timeline table |
| 12 | Scope of this procedure is the Sungrow CombinerBox P6 family (primary) and the Huawei FusionSolar SmartACU2000 / Sungrow SG125HT-family combiner block (alternative) | Sungrow string-inverter product line: Sungrow string inverter range (incl. SG125HT C&I 3-phase, exact datasheet confirmed at RFQ); Huawei FusionSolar Smart Charger (adjacent): Huawei SCharger product page; OEM landings: Sungrow, Huawei FusionSolar | Verdict; Reference Equipment table |
| 13 | Adjacent string/inverter families cited for context are the SMA Sunny Tripower CORE1 (33-US / 50-US / 62-US), Enphase IQ8P, and Fronius GEN24 Plus / Symo / Tauro / Verto | SMA Sunny Tripower CORE1 \| Enphase IQ8P \| Fronius GEN24 Plus \| Fronius Symo \| Fronius Tauro \| Fronius Verto | Reference Equipment table |

---

Document type: Scoped process-control reference (no torque table). Primary scope: Sungrow CombinerBox P6 family. Alternative scope: Huawei FusionSolar SmartACU2000 / Sungrow SG125HT-family combiner block. Evidence date: 2026-09-22. RFQ: [/rfq/](/rfq/). No "verified supplier", ranking, review, or logo claims are made on this page.
