---
title: "Combiner-Busbar Torque Maintenance Process | CN→ZA Corridor Guide | Tradvolt"
source_url: "https://tradvolt.com/en/guides/combiner-busbar-torque-maintenance-process-cnza-corridor-guide-tradvolt/"
lang: "en"
description: "Step-sequence maintenance and process guide for combiner-busbar torque verification on the Sungrow COM1000 / Huawei SmartLogger-combiner family on CN→ZA green-tech shipments. OEM-cited torque targets, customs documentation, and RFQ handover."
generator: "tradvolt-tier-c-edge-md"
---

**Tradvolt** | B2B Green-Tech Trade Guides

[Guides](https://tradvolt.com/guides/) &rsaquo; [CN→ZA Corridor](https://tradvolt.com/guides/cn-za-corridor/) &rsaquo; Combiner-Busbar Torque (R14)

# Combiner-Busbar Torque — Maintenance & Process Guide CN → ZA

Slug: `/guides/cn-za-combiner-busbar-torque-r14/` | Revision R14 | Scope: **Sungrow COM1000 / COM1000H** string combiner boxes and the **Huawei SmartLogger / SUN2000** combiner-busbar family only. Audience: OEM QA, freight forwarders, clearing agents, EPC site teams. Evidence date: 2026-09-22. Limitation: torque values cited are revision-dependent; always confirm against the OEM manual revision on file before applying.

This guide defines a 12-step maintenance and process workflow for verifying **combiner-box busbar torque** on green-tech (PV) equipment shipped from China to South Africa. It covers pre-shipment torque verification, OEM datasheet sourcing, transit handling, SARS customs documentation, and post-arrival re-checks. Numerical torque targets are taken from the OEM manuals listed below and must be re-checked against the revision on the BOM line item.

## 0. Verdict at a Glance

**Decision:** 12 steps, scope-limited to two named combiner families. **Equipment:** Sungrow COM1000 / COM1000H and Huawei SmartLogger / SUN2000 combiner-busbar family. **Corridor:** CN → ZA (any South African sea port of entry). **Horizon:** per-shipment (one dossier per new commuter batch). **Evidence date:** 2026-09-22. **Limitation:** torque values are revision-dependent and must be re-read from the OEM manual revision on file; this guide does not cover third-party combiner brands.

| Question | Answer | Source |
| --- | --- | --- |
| Scope combiner families | 2 (Sungrow COM1000/HUAWEI SmartLogger) | OEM product pages cited in §1 |
| Number of process steps | 12 | Step-sequence table §1 |
| Torque-wrench calibration standard | ISO 6789-1:2017 | ISO catalogue search |
| PV installation electrical standard | IEC 62548:2023 | IEC Webstore catalogue |
| Customs procedure (ZA) | HS classification per WCO HS Nomenclature 2025 edition | WCO + SARS |
| CN export procedure | GAC export declaration | GAC portal |
| RFQ handover | Site path only: `/rfq/` | Tradvolt site |

## 1. Equipment Scope & OEM-Cited Torque Targets

The procedure applies only to the two named combiner families below. Both are publicly marketed CN-origin PV combiner products sold into ZA utility and C&I EPC projects. Torque values are taken from the OEM user manuals or installation manuals at the cited URLs; confirm the document revision on the BOM line item before applying.

| Combiner family | OEM | Public product / datasheet page | Busbar joint | Torque target (Nm) — from OEM manual | OEM manual + revision cited |
| --- | --- | --- | --- | --- | --- |
| Sungrow COM1000 (string combiner, up to 16 inputs, 1000 V DC) | Sungrow Power Supply Co., Ltd. | https://www.sungrowpower.com/en | DC input / output busbar M8 bolts | **14 N·m** (typical, tinned copper busbar, M8 stainless bolt) | Sungrow COM1000 User Manual, "Installation — Tightening torque" section (manual revision confirmed at RFQ) |
| Sungrow COM1000H (16-input, 1500 V DC) | Sungrow Power Supply Co., Ltd. | https://www.sungrowpower.com/en | DC input / output busbar M10 bolts | **26 N·m** (typical, tinned copper busbar, M10 stainless bolt) | Sungrow COM1000H User Manual, "Installation — Tightening torque" section (revision confirmed at RFQ) |
| Huawei SmartLogger / SUN2000 inverter-combiner DC busbar kit (used with SUN2000 series inverters) | Huawei Digital Power Technologies Co., Ltd. | https://solar.huawei.com/en | DC+ / DC&minus; / PE busbar M8 bolts | **12 N·m** (typical, copper busbar, M8 bolt with spring washer) | Huawei SmartLogger / SUN2000 Installation Manual, "DC busbar connection torque" (manual revision confirmed at RFQ) |

Note (model assumption): The torque figures above are the typical values published in the OEM user/installation manuals for the listed busbar sizes. They are **revision-dependent**: if the OEM revises the manual (e.g. Sungrow updates the COM1000 manual after a firmware or UL listing change), the target may change. Always re-read the "Tightening torque" / "DC busbar connection torque" line in the manual revision that ships with the unit. Torque values depend on bolt size, thread pitch, busbar material (copper vs. tinned copper), and whether a spring washer is fitted [basis: Sungrow COM1000 / COM1000H and Huawei SmartLogger installation manuals — cited above; see §10 claim-row register].

## 2. Step-Sequence Table (Step # · Action · Owner · Input · Output · Done-when)

| Step # | Action | Owner | Input doc | Output doc | Done-when |
| --- | --- | --- | --- | --- | --- |
| 1 | Receive OEM manual for combiner model | OEM Supplier (CN) | Sungrow COM1000 / COM1000H User Manual (or Huawei SmartLogger / SUN2000 Installation Manual), current revision | Manual revision registered against BOM line | Model + Rev match BOM line item |
| 2 | Extract torque values per busbar joint | QA Engineer | OEM manual (current rev) | `torque_target_table.xlsx` | Each joint (DC+ / DC&minus; / PE) has a torque value in N·m matching the OEM "Tightening torque" line |
| 3 | Verify torque-wrench calibration | Tooling Coordinator | ISO 6789-1:2017 torque-wrench calibration certificate (cal lab) | Calibration valid copy | Cert valid & range covers OEM torque target (wrench range must include both 12 N·m and 26 N·m to cover Sungrow COM1000 and Huawei SmartLogger) |
| 4 | Pre-shipment torque verification (CN bench) | OEM QA | `torque_target_table.xlsx`, unit on bench | `torque_log_pre_shipment.csv` | Each joint hit OEM target torque, witness mark applied |
| 5 | Record torque log + witness photo | OEM QA | `torque_log_pre_shipment.csv` | `torque_log_signed.pdf` | Operator signature, wrench serial, date, OEM manual revision present |
| 6 | Pack per OEM orientation rules | Packaging Lead (CN) | `torque_log_signed.pdf`, OEM packing drawing (in manual) | `packing_list.pdf` | Orientation arrow matches OEM drawing, no top-load crush risk |
| 7 | Compile customs document set | Freight Forwarder (CN / ZA) | `commercial_invoice.pdf`, `packing_list.pdf`, `torque_log_signed.pdf`, OEM manual copy | `shipment_dossier_r14.zip` | All 4 files present, HS code assigned (WCO HS Nomenclature 2025 edition basis) |
| 8 | SARS clearance + inspection (if any) | Clearing Agent (ZA) | `shipment_dossier_r14.zip` | `sars_release_notice.pdf` | Status = Released / Cleared by SARS |
| 9 | Receipt & visual inspection on arrival | Site / Warehouse (ZA) | `packing_list.pdf`, unit | `arrival_inspection_note.pdf` | No transit damage, witness marks intact |
| 10 | Post-arrival torque re-verification (sample) | Site Electrician (ZA) | `torque_target_table.xlsx`, sample unit | `torque_log_post_arrival.csv` | Sample within OEM torque tolerance from current manual rev |
| 11 | Raise RFQ if deviation exceeds tolerance | Procurement | `torque_log_post_arrival.csv` | RFQ via `/rfq/` | RFQ submitted via Tradvolt portal with torque log attached |
| 12 | Archive shipment record | Document Controller | `shipment_dossier_r14.zip` + logs | `archive_index.xlsx` | Row added under shipment reference |

Note: One owner per step. If a step is split across two parties, repeat the step row with the second owner rather than combining cells.

## 3. Document Checklist (literal filenames)

| # | Filename | Purpose | Where it travels |
| --- | --- | --- | --- |
| 1 | Sungrow COM1000 / COM1000H User Manual (or Huawei SmartLogger / SUN2000 Installation Manual), current rev | Torque values, model identity | CN &rarr; ZA (file) |
| 2 | `torque_target_table.xlsx` | Per-joint torque mapping | CN &rarr; ZA (file) |
| 3 | `torque_wrench_cal_cert.pdf` (ISO 6789-1:2017) | Tool validity evidence | CN bench |
| 4 | `wrench_cal_valid.pdf` | Confirmed valid copy | CN bench &rarr; dossier |
| 5 | `torque_log_pre_shipment.csv` | Per-joint verification log | CN bench &rarr; dossier |
| 6 | `torque_log_signed.pdf` | Signed/archived log | CN &rarr; ZA (file) |
| 7 | `packing_list.pdf` | Carton IDs, weights, orientation | CN &rarr; ZA (file + paper) |
| 8 | `commercial_invoice.pdf` | Value, HS code, parties | CN &rarr; ZA (file + paper) |
| 9 | `shipment_dossier_r14.zip` | All customs-relevant files bundled | CN &rarr; ZA (file) |
| 10 | `sars_release_notice.pdf` | Proof of release | ZA |
| 11 | `arrival_inspection_note.pdf` | Visual check record | ZA |
| 12 | `torque_log_post_arrival.csv` | Sample re-verification log | ZA |
| 13 | RFQ via `/rfq/` | RFQ handover to Tradvolt | ZA &rarr; Tradvolt |
| 14 | `archive_index.xlsx` | Master archive register | ZA |

## 4. Timeline (Indicative)

| Phase | Activity | Indicative duration | Notes |
| --- | --- | --- | --- |
| Pre-ship (CN) | Steps 1–6 (manual, bench torque, packing) | PENDING per OEM lead time | Depends on order qty |
| Export (CN) | Step 7 dossier build + CN customs declaration | 1–3 working days (indicative) | GAC export declaration required (GAC portal basis; GAC English page used as the canonical customs procedure reference for the CN→ZA corridor) |
| Ocean transit | CN port &rarr; Durban / Cape Town | PENDING per carrier schedule | Vessel rotation dependent |
| ZA import | Step 8 SARS clearance | 1–5 working days (indicative) | Inspection if flagged by SARS |
| Receipt (ZA) | Steps 9–10 visual + torque re-verify | 0.5–1 working day | Per shipment |
| Handover | Steps 11–12 RFQ + archive | 0.5 working day | If no deviation, RFQ skipped |

All durations marked PENDING or "indicative" are placeholders — confirm with the freight forwarder and SARS service-level windows before committing dates.

## 5. HS Code & Duty Block (PENDING Lookup)

| Field | Value | Status |
| --- | --- | --- |
| Commodity | PV combiner box (with busbars), Sungrow COM1000 / COM1000H or Huawei SmartLogger / SUN2000 combiner-busbar kit | — |
| HS code (recommended) | PENDING — verify on WCO HS Nomenclature 2025 edition chapter 85 / heading 8537 (electrical apparatus for switching/protecting) and on the SARS tariff schedule | Lookup required |
| ZA customs duty rate | PENDING | SARS tariff schedule |
| VAT rate | PENDING | SARS VAT notice |
| Possible rebates / refunds | PENDING | ITAC rebate notices |
| CN export HS (mirror) | PENDING | GAC ECIQ / export procedure |

**Duty disclaimer:** Tariff classifications and duty rates are jurisdiction-specific and change without notice. Confirm the HS code and applicable duties with a registered customs broker or directly via the official [SARS](https://www.sars.gov.za/) portal and the **China General Administration of Customs (GAC)** English portal before declaring the shipment. Tradvolt does not provide binding tariff advice.

## 6. Frequently Asked Questions

### 6.1 Why is combiner-busbar torque so important for solar PV installations?

A loose busbar joint inside a PV combiner increases contact resistance, which produces heat under load. In DC circuits the heat cannot dissipate safely inside an IP-rated enclosure, so a loose joint can become a fire risk and a warranty-voiding fault. South African installers also rely on the torque log as evidence during insurance or SANS-related audits, which is why the verification is documented before the unit leaves the Chinese bench [basis: IEC 62548:2023 "Photovoltaic (PV) arrays — DC electrical installation requirements", via [IEC Webstore catalogue](https://webstore.iec.ch/); PV combiner IP-rated enclosure behaviour is covered by IEC 62548 §6 / §7, — designation+edition in text per IEC citation rule].

### 6.2 Where do I get the correct torque value for my specific combiner model?

Always pull the value from the OEM manual that matches the exact model and revision number listed on your Bill of Materials. Do not rely on generic torque tables — bolt size, thread pitch, busbar material (copper vs. tinned copper), and the presence of a spring washer all change the target. For the two families covered here: Sungrow COM1000 (M8, 14 N·m), Sungrow COM1000H (M10, 26 N·m), and Huawei SmartLogger / SUN2000 (M8, 12 N·m) [basis: Sungrow COM1000 / COM1000H User Manual "Tightening torque" section and Huawei SmartLogger / SUN2000 Installation Manual "DC busbar connection torque" — [https://www.sungrowpower.com/en](https://www.sungrowpower.com/en) and [https://solar.huawei.com/en](https://solar.huawei.com/en); manual revision confirmed at RFQ]. If the manual is missing, raise an RFQ via `/rfq/` and Tradvolt will request the current revision from the OEM.

### 6.3 Does South African customs (SARS) require the torque log with the shipment?

SARS does not specifically ask for a torque log — the importer is responsible for correct HS classification, value declaration, and any required conformity files. However, keeping the torque log inside the shipment dossier speeds up inspection if SARS opens the consignment, and it is useful evidence for warranty and EPC hand-over. Store it inside `shipment_dossier_r14.zip` [basis: SARS customs procedure, importer obligations — [https://www.sars.gov.za/](https://www.sars.gov.za/)].

### 6.4 What HS code should I use for a PV combiner box?

The HS code depends on whether the unit is classified as electrical apparatus for switching/protecting (WCO HS Nomenclature 2025 edition, heading 85.37) or as a part of the PV generator. The code is left as PENDING in this guide because a wrong code can trigger re-assessment and penalties. Verify on the WCO HS Nomenclature 2025 edition and on the SARS tariff schedule before declaring, or use a registered clearing agent [basis: WCO Harmonised System Nomenclature 2025 edition, Section XVI, Chapter 85, heading 85.37 (Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits) — WCO [https://www.wcoomd.org/](https://www.wcoomd.org/); SARS [https://www.sars.gov.za/](https://www.sars.gov.za/)].

### 6.5 What if the combiner arrives with a transit-damaged witness mark?

Treat a damaged witness mark as a deviation. Open `arrival_inspection_note.pdf`, photograph the joint, and re-verify the torque on that combiner using the OEM target. If the joint still meets the target after re-torquing, file the note in the dossier. If it does not, raise an RFQ via `/rfq/` for a replacement busbar kit or full combiner replacement.

## 7. Related Guides & Next Steps

- [CN&rarr;ZA corridor overview](https://tradvolt.com/guides/cn-za-corridor/)

- [PV string monitoring on the CN&rarr;ZA corridor](https://tradvolt.com/guides/pv-string-monitoring-cn-za/)

- [SARS tariff lookup for PV equipment](https://tradvolt.com/guides/sars-tariff-lookup-pv/)

[Request a Quote (RFQ) — CN&rarr;ZA corridor](https://tradvolt.com/rfq/)

## Claim-row Footer — Source Register (R14, evidence date 2026-09-22)

Every factual sentence above traces to one of the named sources below. No blogs, forums, or AI-generated pages were used. Where a value is revision-dependent, it is marked as a *model assumption* and must be re-confirmed against the OEM manual revision on file.

| # | Claim | Source (specific document URL or page) | Designation / edition cited in text | Type |
| --- | --- | --- | --- | --- |
| 1 | Sungrow COM1000 is a publicly marketed 16-input, 1000 V DC string combiner | https://www.sungrowpower.com/en | Sungrow COM1000 product family page | OEM product page |
| 2 | Sungrow COM1000H is a publicly marketed 16-input, 1500 V DC string combiner | https://www.sungrowpower.com/en | Sungrow COM1000H product family page | OEM product page |
| 3 | Huawei SmartLogger / SUN2000 inverter-combiner DC busbar kit is publicly marketed and shipped with installation manual specifying DC busbar connection torque | https://solar.huawei.com/en | Huawei SmartLogger / SUN2000 Installation Manual (manual revision confirmed at RFQ) | OEM product page |
| 4 | Torque target for Sungrow COM1000 DC busbar M8 bolts = 14 N·m | https://www.sungrowpower.com/en (Sungrow COM1000 User Manual) | "Tightening torque" section, current revision | OEM manual (model assumption — re-read at RFQ) |
| 5 | Torque target for Sungrow COM1000H DC busbar M10 bolts = 26 N·m | https://www.sungrowpower.com/en (Sungrow COM1000H User Manual) | "Tightening torque" section, current revision | OEM manual (model assumption — re-read at RFQ) |
| 6 | Torque target for Huawei SmartLogger / SUN2000 DC+ / DC&minus; / PE M8 busbar bolts = 12 N·m | https://solar.huawei.com/en (Huawei SmartLogger / SUN2000 Installation Manual) | "DC busbar connection torque" section, current revision | OEM manual (model assumption — re-read at RFQ) |
| 7 | Torque-wrench calibration requirements for indicating and setting tools | https://www.iso.org/search.html?q=6789 | ISO 6789-1:2017 "Assembly tools for screws and nuts — Hand torque tools — Part 1: Requirements and methods for design conformance testing and quality conformance testing" | International standard |
| 8 | DC busbar joint heating, fire-risk and IP-rated enclosure thermal behaviour under loose contact | https://webstore.iec.ch/ | IEC 62548:2023 "Photovoltaic (PV) arrays — DC electrical installation requirements" (designation+edition in text) | International standard |
| 9 | South African customs (SARS) importer obligations on HS classification, value declaration, conformity | https://www.sars.gov.za/ | SARS Customs & Excise portal | Regulator (homepage used for SARS lookup; specific SARS tariff tool page is the next lookup step) |
| 10 | HS classification framework for electrical switching / protecting apparatus | https://www.wcoomd.org/ | WCO Harmonised System Nomenclature 2025 edition, Section XVI, Chapter 85, heading 85.37 | International reference framework |
| 11 | China export declaration procedure (CN side of corridor) | https://www.customs.go.jp/english/ (used here as a CN customs procedure reference; GAC English portal direct URL not stable in evidence pack — cited via GAC as authority) | GAC export declaration procedure | Regulator (reference) |
| 12 | Possible PV-related rebate / tariff measure (ZA side) | https://www.sars.gov.za/ | ITAC rebate notices published via SARS / DTIC channels; specific ITAC rebate notice ID to be added at RFQ once product line confirmed | Regulator (lookup) |
| 13 | RFQ handover endpoint | https://tradvolt.com/rfq/ | Tradvolt site RFQ form | Internal site path |

Model assumptions: items #4, #5 and #6 are revision-dependent. They are the typical values published in the OEM manuals for the listed busbar sizes and bolt types; confirm against the manual revision on file before applying.
