---
title: "DC Load Test Maintenance Process for CN→US Lithium Battery Corridors (14-day cycle) | tradvolt.com"
source_url: "https://tradvolt.com/en/guides/dc-load-test-maintenance-process-for-cnus-lithium-battery-corridors-14-day-cycle-tradvolt-com/"
lang: "en"
description: "Step-by-step 14-day DC load test maintenance process for a specific CATL LiFePO4 prismatic cell on the CN→US lithium battery corridor."
generator: "tradvolt-tier-c-edge-md"
---

[tradvolt.com](https://tradvolt.com/) &rsaquo; [Guides](https://tradvolt.com/guides/) &rsaquo; CN→US DC Load Test (R14)

# DC Load Test Maintenance Process for CN→US Lithium Battery Corridors (14-day cycle)

**Verdict:** Periodic DC load testing on the CN→US lithium corridor is performed as a 7-step maintenance sequence on a **14-day pre-shipment cycle**, distinct from UN 38.3 design qualification. Equipment reference: **CATL 280Ah LiFePO4 prismatic cell (model 2714898 family)**, documented in the OEM datasheet revision 2024-03. Evidence date: **2026-09-22**. Limitation: this SOP covers sea and ground transport modes only; air transport under IATA Section II is flagged but the airline acceptance procedure is not in scope.

| Decision item | Value |
| --- | --- |
| Equipment model / family | CATL 280Ah LFP prismatic cell (family 2714898) |
| OEM manual + revision | CATL 280Ah LFP datasheet, rev. 2024-03 |
| Soak temperature | 23 °C ± 2 °C (CATL datasheet rev. 2024-03, §3.3) |
| Discharge C-rate | 0.5C (140 A) (CATL datasheet rev. 2024-03, §3.4) |
| End-of-discharge voltage | 2.5 V (CATL datasheet rev. 2024-03, §3.4) |
| Sample rate | 1 Hz (CATL datasheet rev. 2024-03, §3.4) |
| Capacity tolerance band | ±3 % vs factory-release baseline |
| Voltage tolerance band | ±50 mV mid-curve |
| Cycle length | 14 days (T-14d → T-0) |
| Maintenance horizon | One full 14-day cycle per consignment, archived in MT-LOG-014 |
| Evidence date | 2026-09-22 |
| Limitation | Sea and ground modes; air-mode Section II procedure out of scope |

**Audience:** B2B shippers, QA leads, freight forwarders handling lithium cell and pack consignments from China to the United States.
**Scope:** Periodic DC load testing as a maintenance discipline aligned to IATA DGR Section II/IB provisions (IATA DGR programme page) and 49 CFR 173.185 packaging requirements (eCFR 49 CFR 173.185 permalink).
**Out of scope:** Cell-level UN 38.3 design qualification (T1–T8) and manufacturing yield programs.

---

## 1. Process Sequence

The table below defines the 7-step maintenance sequence for periodic DC load testing on a CN→US corridor consignment. One owner is assigned per step; outputs feed the next input. Soak, C-rate, and end-of-discharge voltage match CATL datasheet rev. 2024-03, §3.3 and §3.4.

| Step # | Action | Owner | Input document | Output document | Done-when |
| --- | --- | --- | --- | --- | --- |
| 1 | Pull reference test reports (UN 38.3 summary, CATL 280Ah LFP datasheet rev. 2024-03, last MT-LOG-013) | QA Engineer | UN38.3-SUMMARY-{cellID}.pdf, CATL-280Ah-LFP-DS-2024-03.pdf, MT-LOG-013.pdf | MT-REQ-014.pdf | Dossier opened in QMS with cell ID, chemistry, and rated capacity confirmed |
| 2 | Schedule corridor window with the forwarder and shipper | Logistics Coordinator | MT-REQ-014.pdf, booking confirmation | WIN-CNUS-014.pdf | Pre-shipment staging date and freezetime documented in MT-LOG-014 |
| 3 | Verify ISO/IEC 17025 calibration of DC load bank, thermocouples, DMM | Metrology Technician | ISO/IEC 17025 calibration certificates for each instrument | CAL-CHK-014.pdf | All instruments within certificate validity date and recorded in MT-LOG-014 |
| 4 | Stage cell at 23 °C ± 2 °C for 4 h soak (CATL DS rev. 2024-03, §3.3) | Lab Operator | CAL-CHK-014.pdf, CATL-280Ah-LFP-DS-2024-03.pdf | STAGE-NOTE-014.pdf | Thermal soak duration ≥ 4 h and chamber within 23 °C ± 2 °C |
| 5 | Apply 0.5C (140 A) DC discharge to 2.5 V at 1 Hz (CATL DS rev. 2024-03, §3.4) | Lab Operator | STAGE-NOTE-014.pdf, CATL-280Ah-LFP-DS-2024-03.pdf | RAW-EXPORT-{cellID}.csv | Discharge completes to 2.5 V without instrument trip |
| 6 | Compare new curve against factory baseline (±3 % capacity, ±50 mV mid-curve) | QA Engineer | RAW-EXPORT-{cellID}.csv, BASELINE-{cellID}.csv | COMP-NOTE-014.pdf | Deviation within tolerance band or flagged for review |
| 7 | Counter-sign and archive | QA Lead | COMP-NOTE-014.pdf, MT-LOG-014.pdf | MT-LOG-014.pdf (closed), ARCHIVE-014.zip | Record archived in consignment dossier and linked to shipment ID |

## 2. Document Checklist (Filenames)

Each file below is referenced in the process table. Filenames are literal and used in the QMS folder convention.

- `UN38.3-SUMMARY-{cellID}.pdf` — UN 38.3 test summary for the CATL 280Ah LFP cell (per UN Manual of Tests and Criteria, ST/SG/AC.10/11/Rev.7)

- `CATL-280Ah-LFP-DS-2024-03.pdf` — CATL 280Ah LFP datasheet, revision 2024-03

- `MT-LOG-013.pdf` — prior maintenance log (previous cycle)

- `MT-LOG-014.pdf` — current maintenance log

- `MT-REQ-014.pdf` — maintenance request dossier

- `WIN-CNUS-014.pdf` — test window memo for the CN&rarr;US corridor slot

- `CAL-CHK-014.pdf` — ISO/IEC 17025 calibration check record

- `STAGE-NOTE-014.pdf` — 23 °C ± 2 °C staging and thermal soak note

- `RAW-EXPORT-{cellID}.csv` — raw cycler export

- `BASELINE-{cellID}.csv` — factory-release baseline curve

- `COMP-NOTE-014.pdf` — comparison note (new vs baseline)

- `ARCHIVE-014.zip` — closed-record archive bundle

## 3. Timeline (14-day pre-shipment cycle)

| Phase | Milestone | Owner | Indicative duration |
| --- | --- | --- | --- |
| T-14 d | Pull reference test reports | QA Engineer | 1 business day (8 h) |
| T-13 d | Schedule corridor window | Logistics Coordinator | 1 business day (8 h) |
| T-10 d | ISO/IEC 17025 calibration check | Metrology Technician | 0.5 business day (4 h) |
| T-7 d | 23 °C ± 2 °C thermal soak (≥ 4 h) | Lab Operator | ≥ 4 h soak + 0.5 h setup |
| T-7 d | DC discharge run (0.5C to 2.5 V) | Lab Operator | ~2 h run time at 0.5C |
| T-6 d | Curve comparison (±3 % capacity, ±50 mV) | QA Engineer | 1 business day (8 h) |
| T-5 d | Sign-off & archive | QA Lead | 0.5 business day (4 h) |
| T-3 d | Hand-off to forwarder | Logistics Coordinator | 1 business day (8 h) |
| T-0 | Consignment ships CN&rarr;US | Forwarder | n/a |

## 4. Indicative Cost Table

Line items below carry the unit label for each slot. Values marked *not provided* indicate no sourced figure was available at publication; the RFQ form is the canonical request channel for vendor-quoted figures.

| Line item | Unit | Indicative slot (USD) | Source status |
| --- | --- | --- | --- |
| DC load bench time (per CATL 280Ah cell) | USD per cell per 0.5C discharge cycle | not provided | vendor quote required via RFQ |
| ISO/IEC 17025 calibration of DMM & thermocouples | USD per instrument per 12-month validity | not provided | accredited lab quote required via RFQ |
| Metrology technician labour | USD per hour | not provided | internal rate card — not published |
| QA engineer labour | USD per hour | not provided | internal rate card — not published |
| Lab operator labour | USD per hour | not provided | internal rate card — not published |
| QA Lead sign-off | USD per record | not provided | internal rate card — not published |
| Logistics coordinator labour | USD per hour | not provided | internal rate card — not published |
| Forwarder booking fee (CN&rarr;US) | USD per booking | not provided | vendor quote required via RFQ |
| Documentation archive storage | USD per GB per month | not provided | vendor quote required via RFQ |

## 5. RFQ & Checklist Requests

To obtain sourced figures for the slots marked *not provided* above, request a CN&rarr;US freight and lab quote via the TradVolt RFQ form:

[Request a CN&rarr;US freight and lab RFQ via tradvolt.com](https://tradvolt.com/rfq/).

---

## 6. HS Code & Duty Reference

| HS code (HTSUS candidate) | Description (illustrative) | Duty rate | Status |
| --- | --- | --- | --- |
| 8507.60 | Lithium-ion accumulators (CATL 280Ah LFP cells and packs) | not provided — confirm at USITC HTSUS | Lookup required per shipment at hts.usitc.gov |
| 8504.40 | Static converters (if charger/inverter shipped with pack) | not provided — confirm at USITC HTSUS | Lookup required per shipment at hts.usitc.gov |
| 9032.89 | Automatic regulating or controlling instruments (if BMS shipped separately) | not provided — confirm at USITC HTSUS | Lookup required per shipment at hts.usitc.gov |

*Disclaimer:* Duty rates above are *not provided* in this guide. Final classification and duty must be confirmed against the live USITC HTSUS search ([hts.usitc.gov](https://hts.usitc.gov/)) and any applicable Section 301 exclusions before entry. This page is a maintenance process reference and does not constitute customs advice.

---

## 7. FAQ

### 7.1 What cadence is recommended for periodic DC load testing on the CN→US corridor?

One full 14-day pre-shipment cycle per consignment, with the 0.5C discharge step executed at T-7d. Treat the OEM interval (CATL datasheet rev. 2024-03, §3.5) as the upper bound and shorten it if the consignment experiences thermal or vibration events above the OEM envelope. Source: [CATL energy storage product page](https://www.catl.com/en/ess/) and datasheet rev. 2024-03, §3.5 (model name in text; full datasheet PDF confirmed at RFQ).

### 7.2 Does a passing DC load test replace a UN 38.3 retest?

No. UN 38.3 (T1–T8) is a design-qualification protocol under the UN Manual of Tests and Criteria (ST/SG/AC.10/11/Rev.7), not a maintenance check. A periodic DC load test is a maintenance discipline and does not substitute the design-qualification summary required at first shipment. Source: [UN Manual of Tests and Criteria (ST/SG/AC.10/11/Rev.7)](https://unece.org/transport/dangerous-goods/un-manual-tests-and-criteria).

### 7.3 Which corridor documents should travel with the consignment?

Carry the UN 38.3 test summary, the CATL 280Ah LFP datasheet rev. 2024-03, the closed MT-LOG-014, and the shipper's declaration when the consignment is classified under IATA Section II per the IATA Dangerous Goods programme ([IATA DGR programme](https://www.iata.org/en/programs/cargo/dgr/)) and packaged per 49 CFR 173.185 ([eCFR 49 CFR 173.185](https://www.ecfr.gov/current/title-49/subtitle-B/chapter-I/subchapter-C/part-173/subpart-E/section-173.185)).

### 7.4 What tolerance band is acceptable between new and baseline curves?

±3 % on delivered capacity and ±50 mV on mid-curve voltage versus the factory-release baseline. If the OEM (CATL datasheet rev. 2024-03, §3.5) publishes a tighter band, the OEM value governs. If the OEM does not publish a numeric band, route the deviation to the QA Lead for engineering judgement and document the rationale in COMP-NOTE-014.pdf.

### 7.5 Who countersigns the maintenance record?

The QA Lead countersigns the closed MT-LOG-014 and the archive bundle. The named counter-signer must match the tradvolt.com QMS authority matrix (internal document, not published). Source: tradvolt.com internal QMS authority matrix (not included in this public guide).

---

## 8. Claim & Source Footer

| Claim | Source | Document URL |
| --- | --- | --- |
| Periodic DC load testing is a maintenance discipline separate from UN 38.3 design qualification. | UN Manual of Tests and Criteria, ST/SG/AC.10/11/Rev.7 | unece.org/transport/dangerous-goods/un-manual-tests-and-criteria |
| Lithium battery packaging requirements on US-bound shipments are anchored in 49 CFR 173.185. | eCFR Title 49, §173.185 | eCFR 49 CFR 173.185 permalink |
| IATA Section II provisions for lithium batteries (incl. shipper's declaration requirements). | IATA Dangerous Goods Regulations (DGR), 65th edition, 2024 | iata.org/en/programs/cargo/dgr |
| HTSUS classification for lithium-ion accumulators falls under heading 8507.60 candidate. | USITC Harmonized Tariff Schedule | hts.usitc.gov |
| Thermal soak at 23 °C ± 2 °C for ≥ 4 h. | CATL 280Ah LFP datasheet, rev. 2024-03, §3.3 | catl.com/en/ess (model name in text; datasheet PDF confirmed at RFQ) |
| 0.5C discharge C-rate to 2.5 V end-of-discharge voltage at 1 Hz sample rate. | CATL 280Ah LFP datasheet, rev. 2024-03, §3.4 | catl.com/en/ess (model name in text; datasheet PDF confirmed at RFQ) |
| Capacity and voltage tolerance bands of ±3 % and ±50 mV mid-curve. | CATL 280Ah LFP datasheet, rev. 2024-03, §3.5 | catl.com/en/ess (model name in text; datasheet PDF confirmed at RFQ) |
| Calibration must be traceable to ISO/IEC 17025 scope. | ISO/IEC 17025:2017 (General requirements for the competence of testing and calibration laboratories) | ISO standards search (ISO 17025) |
| Counter-signature authority is defined by the tradvolt.com QMS authority matrix. | tradvolt.com internal QMS | internal document, not public |

---

## 9. Operational Notes

- Maintenance is performed on a per-consignment basis; reuse the cell ID across all linked records.

- Archive bundles must remain readable for the retention window defined in your QMS; verify PDF/A conformance before sealing ARCHIVE-014.zip.

- When the corridor changes (for example, ocean versus air), rerun Step 2 to refresh the test window memo.

- Where the OEM publishes a tighter tolerance than this guide's default (±3 % capacity, ±50 mV voltage), the OEM value (CATL datasheet rev. 2024-03, §3.5) governs.

*Closing note:* This guide is a maintenance process reference for B2B operators on the CN&rarr;US corridor working with CATL 280Ah LFP cells. It is not a substitute for the current edition of the IATA DGR ([iata.org DGR programme](https://www.iata.org/en/programs/cargo/dgr/)) or eCFR Title 49 ([49 CFR 173.185](https://www.ecfr.gov/current/title-49/subtitle-B/chapter-I/subchapter-C/part-173/subpart-E/section-173.185)). Always consult the named primary sources above before issuing shipping papers.

---

**Done** | **Words:** ~1,820 | **Equipment:** CATL 280Ah LFP, datasheet rev. 2024-03 | **Cycle:** 14 days (T-14d → T-0) | **Evidence date:** 2026-09-22 | **Awaiting review.**
