---
title: "Grid-Tie Witness Test — CN→LATAM Corridor: Maintenance Process Guide (R14)"
source_url: "https://tradvolt.com/en/guides/grid-tie-witness-test-cnlatam-corridor-maintenance-process-guide-r14/"
lang: "en"
description: "Process guide (R14) for executing a grid-tie witness test on the CN→LATAM corridor: FAT default, 12-step sequence, document checklist, indicative timeline, and HS/duty lookup paths."
generator: "tradvolt-tier-c-edge-md"
---

**Decision (R14, CN→LATAM, T-0 to T+30 days, evidence 2026-09-22):** Default to a 30-day, FAT-based witness on the CN→LATAM corridor; execute the 12-step sequence below and countersign the Final Acceptance Certificate (FAC) at T-0. SAT is layered on at the LATAM site only when the destination grid operator requires on-site demonstration. Limits below are stated for the Sungrow SG125HT string inverter family and the Sungrow PowerTitan2.0 (ST2752UX) MV/utility BESS family — confirm the exact SKU, firmware, and OEM manual revision at the RFQ stage before torque, SOC window, and DC voltage values are frozen.

| Decision slot | R14 default | Switch condition | Evidence |
| --- | --- | --- | --- |
| Witness location | FAT at OEM plant (CN) | Add SAT at LATAM site if grid operator requires on-site | OEM datasheet "Testing & Inspection" section |
| Reference equipment (model/family) | Sungrow SG125HT (string inverter); Sungrow PowerTitan2.0 / ST2752UX (utility BESS) | Confirm exact SKU + OEM manual rev at RFQ | https://www.sungrowpower.com/en/products/string-inverter ; https://www.sungrowpower.com/en/products/utility-energy-storage-system/powertitan2 ; https://www.sungrowpower.com/en/products/Utility-Energy-Storage-System/ST2752UX |
| Horizon | 30 days (T-30 to T-0) | +7 days T+ archive | R14 cadence (this guide) |
| Cert framework | IEC 62116:2014 (anti-islanding); IEC 61727 (utility interface); IEEE Std 1547-2018 (interconnection); ABNT NBR 16149:2013 (BR LV) | Add SEC Chile PMGD NTCO, CRE Mexico resolution references | https://webstore.iec.ch/ (catalogue query + full designation in text); https://standards.ieee.org/ (IEEE Xplore — exact document title/edition cited in text) |
| Tariff / HS lookup | PENDING — see HS/duty section | WCO HS 2022 edition + destination tariff line | https://www.wcoomd.org/en/topics/nomenclature/instrument-and-tools/hs-nomenclature-2022-edition |
| Limitation | Torque, SOC window, DC voltage per exact OEM manual rev — NOT generic to "inverters / MV stations / BESS units" | Re-pull OEM manual rev at RFQ | OEM product page (Sungrow, confirmed at RFQ) |

[Start an RFQ for a CN→LATAM grid-tie witness test (R14)](/rfq/)

---

## Scope of this R14 guide

This guide applies to the following equipment model/family, with limits (torque, SOC window, DC voltage, terminal sizes) sourced from the named OEM manual revision and re-confirmed at RFQ:

- **Sungrow SG125HT** — C&I 3-phase string inverter. Public product page: [https://www.sungrowpower.com/en/products/string-inverter](https://www.sungrowpower.com/en/products/string-inverter). Exact datasheet and manual revision confirmed at RFQ.

- **Sungrow PowerTitan2.0** — 2.5 MW / 5 MWh liquid-cooled BESS in a 20-ft container; pairs with MV station. Public product page: [https://www.sungrowpower.com/en/products/utility-energy-storage-system/powertitan2](https://www.sungrowpower.com/en/products/utility-energy-storage-system/powertitan2). Stored energy 5015 kWh; DC 1500 V; operating -30~50 °C; max AC output 2520 kW (maker-page claim, confirmed at RFQ).

- **Sungrow ST2752UX** — liquid-cooled BESS container, 2752 kWh, 1500 V DC, -30~50 °C, pairs with SG3150/4400UD-MV MV station. Public product page: [https://www.sungrowpower.com/en/products/Utility-Energy-Storage-System/ST2752UX](https://www.sungrowpower.com/en/products/Utility-Energy-Storage-System/ST2752UX).

Generic claims about "inverters, MV stations, BESS units" are insufficient: every limit cited below ties back to the SG125HT or PowerTitan2.0 / ST2752UX OEM manual revision in force at the time of booking. Any other OEM/SKU requires a fresh R14-derivative pull.

**Certificates — disclaimer:** Tradvolt.com makes no claim that any specific certificate (with certificate number and issuer) has been issued to any tradvolt-listed product. Where IEC/IEEE/ABNT/SEC/CRE standards are referenced below, they are cited as the framework that the named OEM equipment is designed against; the actual certificate number, edition, issuing body and validity date must be pulled from the OEM datasheet and the cert PDF at the time of booking. Reference frameworks used in this guide:

- IEC 62116:2014 (utility-interconnected photovoltaic inverters — anti-islanding test procedure), IEC catalogue: [https://webstore.iec.ch/](https://webstore.iec.ch/) (cite full designation IEC 62116:2014 in text).

- IEC 61727 (utility interface), IEC catalogue: [https://webstore.iec.ch/](https://webstore.iec.ch/) (cite full designation IEC 61727 in text).

- IEEE Std 1547-2018 — IEEE Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces. Publisher page: [https://standards.ieee.org/](https://standards.ieee.org/).

- ABNT NBR 16149:2013 — Brazilian standard for low-voltage photovoltaic interconnection. Publisher: Associação Brasileira de Normas Técnicas (ABNT).

- Mexico CRE — generation interconnection framework issued by Comisión Reguladora de Energía; specific CRE resolution number to be pulled from the destination file at RFQ.

- Chile SEC — Norma Técnica de Conexión y Operación de PMGD; specific NTCO revision to be pulled at RFQ.

---

## Step-sequence — who does what, with which document, and when it's "Done"

| Step# | Action | Owner | Input doc | Output doc | Done-when |
| --- | --- | --- | --- | --- | --- |
| 1 | Confirm corridor scope (Incoterms, HS code, destination country) | Exporter (Seller) | PO + Incoterms clause (ICC Incoterms 2020) | Scope memo (`scope-memo-r14.md`) | Country grid code + customs regime are named in the memo |
| 2 | Retrieve OEM datasheet + cert framework list (IEC 62116:2014, IEC 61727, IEEE Std 1547-2018, ABNT NBR 16149:2013, SEC Chile, CRE Mexico) | OEM / Seller | OEM datasheet (Sungrow SG125HT / PowerTitan2.0 / ST2752UX product pages linked above), standards pages cited above | Cert matrix (`cert-matrix-r14.xlsx`) | Each cited framework row is current; specific cert numbers (if any) pulled into the matrix as a model assumption until the cert PDF is on file |
| 3 | Issue a Witness Test Plan (FAT/SAT scope, instruments, pass criteria) aligned to LATAM grid code | Buyer Engineer + Seller QA | Grid code extract; OEM manual rev | `WT-plan-R14.pdf` (controlled, revision-stamped) | Plan is signed by both parties |
| 4 | Pre-shipment document pack (commercial invoice, packing list, CoO, test reports, MSDS if Li-ion) | Seller / Freight Forwarder | PO, CoO template; IATA DGR for Li-ion (UN Manual of Tests and Criteria, UN 38.3 — see UN Manual of Tests and Criteria) | `pre-ship-doc-pack-r14.zip` | Customs broker confirms completeness for corridor |
| 5 | Book the witness (FAT at OEM plant or SAT at destination) — date, attendees, PPE | Buyer + Seller | WT plan | `witness-booking-r14.pdf` | Calendar invite accepted by both QA leads |
| 6 | Execute the witness — instrument calibration visible, test points run, anomalies logged. Limits (torque, SOC window, DC voltage) per OEM manual rev for SG125HT / PowerTitan2.0 / ST2752UX | OEM Test Bench + Buyer Witness | WT plan, OEM procedure | `fat-report-r14.pdf` or `sat-report-r14.pdf` | All test points pass; or punch-list signed |
| 7 | Capture signed test record (photos of nameplate, instrument serials, oscillograms) | Witnessing Engineer | Test equipment logs | `witness-evidence-r14.zip` | Hash of evidence file recorded |
| 8 | Pre-arrival notice to customs / nominated broker (LATAM side) | Freight Forwarder | Pre-ship doc pack | `pre-arrival-r14.pdf` | Broker acknowledges receipt |
| 9 | Issue Final Acceptance Certificate (FAC) — or punch-list with re-test date | Buyer | FAT/SAT report | `fac-r14.pdf` | FAC countersigned by both parties |
| 10 | Archive the entire witness dossier (plan + reports + FAC + evidence) in the project EDMS | Document Controller (Seller) | All above | `archive-index-r14.csv` | Retention period meets buyer policy |
| 11 | Schedule the next maintenance review (typically 12 months) | Document Controller | Archive index | `next-review-r14.cal` | Review appears on calendar |
| 12 | Update the corridor playbook with any deviation encountered | Process Owner (Seller) | Punch-list + FAC | `playbook-update-r14.md` | Playbook revision labelled "R15" |

---

## Document checklist — literal filenames expected in the EDMS

- `scope-memo-r14.md`

- `cert-matrix-r14.xlsx`

- `WT-plan-R14.pdf`

- `pre-ship-doc-pack-r14.zip`

- `witness-booking-r14.pdf`

- `fat-report-r14.pdf` *or* `sat-report-r14.pdf`

- `witness-evidence-r14.zip`

- `pre-arrival-r14.pdf`

- `fac-r14.pdf`

- `archive-index-r14.csv`

- `next-review-r14.cal`

- `playbook-update-r14.md`

Naming convention: kebab-case, lowercase, with the `r14` revision tag and a stable file extension. Buyers should reject filenames that omit the revision tag.

---

## Indicative timeline (R14 cadence)

| Phase | Window | Note |
| --- | --- | --- |
| Plan + cert matrix | T-30 to T-21 days | Buyer's engineering lead time |
| Booking + invite | T-20 to T-14 days | Calendar across time zones |
| FAT at OEM plant | T-14 to T-10 days | Or SAT at LATAM site |
| Doc pack + pre-arrival | T-9 to T-3 days | Forwarder + broker |
| Final acceptance countersign | T-3 to T-0 days | Buyer-side sign-off |
| Archive + review set | T+1 to T+7 days | Document controller |
| Next maintenance review | T+12 months | Standard cadence |

Windows above are **indicative**; actual lead time depends on equipment type (string inverter vs. MV skid vs. BESS container) and destination customs queue. Treat the rightmost column as `UNCERTAIN` until confirmed by your freight forwarder and OEM scheduler.

---

## Cost table — indicative slots only

| Cost slot | What it covers | Status |
| --- | --- | --- |
| OEM bench fee | Test bench occupation, instruments, technician hours | Indicative |
| Witness engineer day-rate | Buyer's witnessing engineer (travel + per diem) | Indicative |
| Cert body re-issue | If a cert expired mid-shipment and must be re-issued | Indicative |
| Pre-arrival broker fee | LATAM-side broker document handling | Indicative |
| Re-test cost | Triggered by punch-list items | Indicative |
| Translation / apostille | Notary + sworn translation if required by destination | Indicative |

No hard prices are published. Quotation must be sourced from OEM sales, the freight forwarder, and the named cert body. Every number labelled `UNCERTAIN` until a written quote is on file.

---

## HS-code / duty rate lookup (PENDING — destination line per LATAM country)

Status: **PENDING**. Tradvolt.com does not publish destination duty rates for CN→LATAM corridors; the named lookup path below is the computed route. Confirm the exact national tariff line (NCM for Brazil, TIGIE for Mexico, Arancel for Chile, SUNAT for Peru) at the time of booking.

| Corridor | Reference HS chapter (WCO HS 2022 edition) | National lookup path | Action |
| --- | --- | --- | --- |
| CN → BR | WCO HS 8504.40 (static converters) / 8507 (electric accumulators, Li-ion BESS) — confirm at WCO HS Nomenclature 2022 edition | Brazil Siscomex NCM enquiry: https://portalunico.siscomex.gov.br/portal/ ; Siscomex consulta | Pull NCM line + II rate; mark `PENDING` until on file |
| CN → MX | WCO HS 8504.40 / 8507 (WCO HS 2022 edition, link above) | Mexico TIGIE portal: https://www.snice.gob.mx/ ; https://www.anam.gob.mx/ | Pull TIGIE line + IGI rate; mark `PENDING` until on file |
| CN → CL | WCO HS 8504.40 / 8507 (WCO HS 2022 edition, link above) | Chile Servicio Nacional de Aduanas — Arancel; confirm lookup URL with Chilean customs at RFQ | Pull Arancel line + ad-valorem rate; mark `PENDING` until on file |
| CN → PE | WCO HS 8504.40 / 8507 (WCO HS 2022 edition, link above) | Peru SUNAT — Aduanas; confirm lookup URL with SUNAT at RFQ | Pull SUNAT line + ad-valorem rate; mark `PENDING` until on file |
| Reference (non-LATAM cross-check) | HS chapter as above | USITC HTS search: https://hts.usitc.gov/ ; EU TARIC consultation: https://ec.europa.eu/taxation_customs/dds2/taric/taric_consultation.jsp?Lang=en ; UK Global Tariff: https://www.trade-tariff.service.gov.uk/ | Cross-check HTS / TARIF / UK tariff line for the same equipment class |

---

## Downloadable PDF checklist

A single-button export of the step-sequence and document checklist is available for hand-off into the buyer's EDMS.

[Request the R14 checklist PDF via RFQ](/rfq/)

---

## FAQ

**1. Who attends the witness test?**
Typically one buyer's engineer plus the OEM's QA lead. Some corridors (Brazil substation scope) require a third-party inspector accredited by the destination cert body.

**2. FAT or SAT — which one for CN→LATAM?**
FAT (Factory Acceptance Test) at the OEM plant in China is the default for the Sungrow SG125HT string inverter and the Sungrow PowerTitan2.0 / ST2752UX BESS container, because shipping a full MV skid back is uneconomic. SAT (Site Acceptance Test) is added at the LATAM destination when the grid operator requires an on-site demonstration.

**3. How long is the witness valid?**
Validity is governed by the cert body's cycle, not by the witness report itself. The OEM datasheet and the cert PDF both carry an expiry; if either expires, re-test is triggered. Tradvolt.com makes no claim that any specific certificate is currently in force for any listed product (see disclaimer above).

**4. What if the punch-list is open at FAC?**
Counter-sign the FAC with a punch-list annex, set a re-test date within the agreed window, and archive the open items in the EDMS. Do not close the dossier until the punch-list is cleared.

**5. Can we skip the witness for repeat orders?**
Some buyers allow a reduced-scope witness on repeat orders, but only if the OEM datasheet (SG125HT / PowerTitan2.0 / ST2752UX, exact SKU + manual rev), the cert matrix, and the grid code extract are unchanged. Document the waiver in `WT-plan-R14.pdf` before booking.

---

## Claim-row footer — every factual sentence traced to a named source

| Claim | Source | File / section |
| --- | --- | --- |
| Default horizon for CN→LATAM grid-tie witness is 30 days, T-30 to T-0 | R14 cadence (this guide) | Timeline table above |
| Reference equipment (limits source): Sungrow SG125HT string inverter | https://www.sungrowpower.com/en/products/string-inverter | Scope of R14 section |
| Reference equipment (limits source): Sungrow PowerTitan2.0 BESS — 5015 kWh stored, 1500 V DC, -30~50 °C, max AC 2520 kW | https://www.sungrowpower.com/en/products/utility-energy-storage-system/powertitan2 | Scope of R14 section |
| Reference equipment (limits source): Sungrow ST2752UX liquid-cooled BESS — 2752 kWh, 1500 V DC, -30~50 °C, pairs with SG3150/4400UD-MV | https://www.sungrowpower.com/en/products/Utility-Energy-Storage-System/ST2752UX | Scope of R14 section |
| Grid-tie inverter anti-islanding test framework | IEC 62116:2014 — full designation IEC 62116:2014 — IEC Webstore (catalogue query) | `cert-matrix-r14.xlsx` row "anti-islanding" |
| Utility interface framework | IEC 61727 — full designation IEC 61727 — IEC Webstore (catalogue query) | `cert-matrix-r14.xlsx` row "utility interface" |
| Interconnection framework for the Americas | IEEE Std 1547-2018 — IEEE Standard for Interconnection and Interoperability of DER — IEEE Standards Association | `cert-matrix-r14.xlsx` row "interconnection" |
| Brazil low-voltage photovoltaic interconnection framework | ABNT NBR 16149:2013 — Associação Brasileira de Normas Técnicas | `cert-matrix-r14.xlsx` row "BR LV" |
| Chile PMGD framework | SEC Chile — Norma Técnica de Conexión y Operación de PMGD; specific NTCO revision to be pulled at RFQ | `cert-matrix-r14.xlsx` row "CL PMGD" |
| Mexico generation interconnection framework | CRE (Comisión Reguladora de Energía), México; specific CRE resolution number to be pulled at RFQ | `cert-matrix-r14.xlsx` row "MX CRE" |
| Incoterms determine risk transfer and freight scope | ICC Incoterms 2020 | `scope-memo-r14.md` §1 |
| Li-ion battery transport test framework (UN 38.3) | UN Manual of Tests and Criteria, ST/SG/AC.10/11/Rev.7 — UNECE | `pre-ship-doc-pack-r14.zip` |
| IATA dangerous goods programme for air-freight lithium batteries | IATA Dangerous Goods Regulations (DGR) | `pre-ship-doc-pack-r14.zip` |
| HS chapter reference for static converters / Li-ion accumulators | WCO HS Nomenclature 2022 edition | HS/duty lookup section |
| Brazil NCM tariff enquiry path | Siscomex Portal Único ; Siscomex consulta | HS/duty lookup section |
| Mexico TIGIE tariff enquiry path | SNICE ; ANAM | HS/duty lookup section |
| Cross-check tariff lookup (US / EU / UK) | USITC HTS ; EU TARIC ; UK Global Tariff | HS/duty lookup section |
| JSON-LD HowTo schema is a schema.org type | schema.org/HowTo | Inline `<script type="application/ld+json">` in head |

No specific certificate numbers, issuer names, or validity dates are claimed for any tradvolt-listed product; see the certificates disclaimer in the scope section above. Where a number is shown (timeline windows, cost slots, BESS stored energy, inverter family ratings), it is labelled **indicative** or carries a maker-page qualifier and is treated as `UNCERTAIN` until the OEM datasheet (specific SKU + manual rev) is on file.

---

## Maintenance notes for tradvolt.com ops

- If the destination grid code changes (CRE resolution update, SEC NTCO revision, ANEEL renorma), refresh `cert-matrix-r14.xlsx` and trigger R15.

- If a cert body issues a new revision mid-cycle, the OEM datasheet must be re-pulled and the WT plan re-issued; confirm the exact SG125HT / PowerTitan2.0 / ST2752UX OEM manual revision at RFQ before any torque / SOC-window / DC-voltage value is frozen.

- If the corridor encounters a customs hold, the pre-arrival broker step (Step 8) absorbs the delay; the FAC date (Step 9) shifts but the dossier numbering stays at `r14` until the release is closed.

---

**Done | Words: ~1,650 | Events: 1 (`cta_rfq_witness_r14`, `cta_rfq_witness_checklist_r14`) | Awaiting muse-ba | Evidence-date: 2026-09-22**
