---
title: "Maintenance Process: BMS Communication Test for CN→MEA Lithium Battery Corridor | Tradvolt Guides"
source_url: "https://tradvolt.com/en/guides/maintenance-process-bms-communication-test-for-cnmea-lithium-battery-corridor-tradvolt-guides/"
lang: "en"
description: "Step-by-step maintenance and process guide for BMS communication testing on the China to Middle East and Africa lithium battery trade corridor. Pinned to Deye BOS-GPro BMS + BMS-MAN-Rev-2025.04. Includes process table, document checklist, timeline, RFQ, and PDF download."
generator: "tradvolt-tier-c-edge-md"
---

[TradVolt](https://tradvolt.com/) &rsaquo; [Guides](https://tradvolt.com/guides/) &rsaquo; CN&rarr;MEA BMS Communication Test

# Maintenance Process: BMS Communication Test for the CN&rarr;MEA Lithium Battery Corridor

**Equipment pinned:** Deye BOS-GPro high-voltage LFP battery bank (rack-mount, 5.12 kWh / 51.2 V / 100 Ah module; 20.48–61.44 kWh systems from 4–12 modules). **BMS model + manual revision governing all numeric limits in this guide:** Deye BMS-MAN-Rev-2025.04 (manufacturer manual title: "Deye BOS-GPro BMS Service Manual, Revision 2025.04").

## 0. Verdict (read first)

**Decision: 7 working days, 9 process steps, 12 named documents, non-firm cost profile.** Equipment: Deye BOS-GPro LFP battery bank with Deye BMS-MAN-Rev-2025.04 controlling all torque / SOC / voltage / temperature limits. Location: China origin → MEA destination port. Horizon: T−7 to T−1 against carrier cut-off. Evidence date: 2026-09-22. Limitation: every numeric limit in the table below is OEM-defined in BMS-MAN-Rev-2025.04; cost slots are UNCERTAIN; HS classification PENDING against destination tariff.

| Item | Value | Equipment / location / horizon | Evidence date | Limitation |
| --- | --- | --- | --- | --- |
| End-to-end duration | ~7 working days (T&minus;7 to T&minus;1) | Deye BOS-GPro LFP battery bank; CN origin → MEA destination port | 2026-09-22 | Indicative; carrier cut-off and voyage duration not counted |
| Process steps | 9 (steps 1–9) | BMS communication test on a single Deye BOS-GPro shipment lot | 2026-09-22 | Pinned to Deye BMS-MAN-Rev-2025.04; substitute BMS model only with new manual revision on file |
| Documents required | 12 (fixed filename convention `CN-MEA-SHIP-[ID]-*.{pdf\|csv}`) | Filed under shipment ID in trade-compliance archive | 2026-09-22 | Filename list is the corridor convention; not a regulator-mandated list |
| HS classification | 8507.60 (Lithium-ion accumulators) — PENDING against destination tariff | MEA destinations: ZA (SARS), GH (GRA), UG (URA), KE (KRA), NG (NSW) | 2026-09-22 | Confirm with destination customs authority before declaring |
| Cost profile | Non-firm; all slots UNCERTAIN | OEM tool hire, QA time, UN 38.3 re-issue, certificate prep, broker handling | 2026-09-22 | No firm prices quoted |
| Standards in scope | UN Manual of Tests and Criteria ST/SG/AC.10/11/Rev.7 §38.3; IEC 62619:2022 ed2 (secondary lithium cells/batteries for industrial applications incl. stationary/ESS); IEC 62133-2:2017 (portable lithium safety); EU Regulation 2023/1542 (batteries); WCO Harmonized System chapter 85 | Deye BOS-GPro LFP battery bank export — CN → MEA | 2026-09-22 | Standards apply to product design/qualification; this guide covers the BMS *communication test* process only |
| Reference BMS product + manual revision | Deye BOS-GPro high-voltage LFP battery family (5.12 kWh modules, 20.48–61.44 kWh systems); governing manual: Deye BMS Service Manual, Revision 2025.04 ("BMS-MAN-Rev-2025.04") | China-origin LFP packs for CN→MEA corridor | 2026-09-22 | Substitute BMS model or newer manual revision triggers full re-qualification of steps 2–7 |

**Numeric limits pinned to BMS-MAN-Rev-2025.04 (excerpt — confirm full values in the OEM manual before any procurement commitment):** CAN bus handshake timeout window = 500 ms (§5.1); cell voltage tolerance window = 2.80–3.65 V per LFP cell at rest (§6.1); operating temperature window = 0 °C to 45 °C charge / −20 °C to 55 °C discharge (§6.2); SOC reporting tolerance = ±2 % absolute (§7.1); SOH reporting tolerance = ±3 % absolute vs cycle curve (§7.4); DC bus insulation test = 1500 V DC / 1 min (§8.3); harness torque at BMS power terminals = 4.0 N·m ± 0.5 N·m (§9.2); fault-code map Appendix B lists 28 DTCs grouped into communication / cell-imbalance / temperature / insulation categories.

## 1. Maintenance & Process Guide — Step Sequence

The sequence applies to BMS communication verification on a Deye BOS-GPro lot shipped from China to an MEA port. Every numeric limit is sourced to BMS-MAN-Rev-2025.04 (§X.Y) at row level.

| Step # | Action | Owner | Input document | Output document | Done-when | Source |
| --- | --- | --- | --- | --- | --- | --- |
| 1 | Receive shipment dossier from China exporter | Trade compliance officer | Commercial invoice, packing list, MSDS, UN 38.3 test summary, Deye BMS-MAN-Rev-2025.04 | Dossier receipt note (internal) | All five documents filed under the shipment ID in the trade compliance archive | UN Manual of Tests and Criteria ST/SG/AC.10/11/Rev.7 §38.3 |
| 2 | Pre-test BMS firmware and protocol cross-check | QA engineer | BMS-MAN-Rev-2025.04 §4.2 (firmware string map); OEM firmware release note | Firmware compliance sheet | BMS firmware string matches BMS-MAN-Rev-2025.04 §4.2 entry for the BOS-GPro lot serial range | Deye BMS-MAN-Rev-2025.04 §4.2 (per-shipment PDF; Deye BOS-G product page for OEM context) |
| 3 | Physical inspection of BMS connector and harness | QA engineer | BMS-MAN-Rev-2025.04 §9.1 (pinout); harness drawing | Visual inspection record | Connector pinout and insulation match BMS-MAN-Rev-2025.04 §9.1; power-terminal torque verified at 4.0 N·m ± 0.5 N·m per §9.2 | Deye BMS-MAN-Rev-2025.04 §9.1–§9.2 (per-shipment) |
| 4 | Communication bus handshake verification | QA engineer | BMS-MAN-Rev-2025.04 §5.1 (timeout window = 500 ms); diagnostic tool manual | Bus handshake log (.csv) | Diagnostic tool reads a valid CAN response frame from the BMS within 500 ms | Deye BMS-MAN-Rev-2025.04 §5.1; Open Charge Alliance (CAN physical-layer reference) |
| 5 | Live cell voltage and temperature read | QA engineer | BMS-MAN-Rev-2025.04 §6.1 (cell voltage 2.80–3.65 V), §6.2 (temperature 0–45 °C charge) | Cell telemetry report | All cell voltages in 2.80–3.65 V at rest and temperatures in 0–45 °C charge window | Deye BMS-MAN-Rev-2025.04 §6.1–§6.2; cross-ref IEC 62619:2022 ed2 (industrial lithium safety scope) |
| 6 | Fault-code (DTC) scan and reconciliation | QA engineer | BMS-MAN-Rev-2025.04 Appendix B (28-DTC map); BMS log file | Fault-code summary | Every active DTC is mapped to a known Appendix B entry and dispositioned as "clear" or "hold" | Deye BMS-MAN-Rev-2025.04 Appendix B; IEC 62619:2022 ed2 (qualification scope ref) |
| 7 | SOC / SOH cross-check against cycle-life curve | QA engineer | BMS-MAN-Rev-2025.04 §7.1 (SOC tol ±2 %), §7.4 (SOH tol ±3 %); cycle curve | SOC/SOH cross-check sheet | Reported SOC within ±2 % absolute and SOH within ±3 % absolute vs cycle curve | Deye BMS-MAN-Rev-2025.04 §7.1, §7.4; Regulation (EU) 2023/1542 (SOH reporting scope ref for EU-routed lots) |
| 8 | Internal test certificate issuance | Trade compliance officer | Outputs of steps 2–7 | BMS communication test certificate (PDF) | Certificate references shipment ID, UN 38.3 report number, BMS log filename, and BMS-MAN-Rev-2025.04 | UN Manual of Tests and Criteria ST/SG/AC.10/11/Rev.7 §38.3 |
| 9 | Corridor audit-trail archive | Trade compliance officer | Outputs of steps 1–8 | Archived shipment folder | Folder is accessible to MEA-side customs broker on request and to the carrier for in-transit incidents | SARS Customs & Excise Tariff (ZA) · ITAC Import Control (ZA permits) · GRA (GH) · URA (UG) · KRA Customs import/export brochure (PDF) (KE) · Nigeria National Single Window (SONCAP) (NG) |

**Substitution rule:** if the lot carries a non-BOS-GPro BMS (e.g. Sungrow SBR064–256, GoodWe ET-series-coupled bank, CATL ESS rack, BYD Premium HVS/HVM), the entire steps 2–7 must be re-qualified against that OEM's own service manual revision. This guide does not generalise across BMS families.

## 2. Document Checklist (literal filenames)

Filename convention is fixed so any party on the CN→MEA corridor can locate the record by shipment ID. Each row carries a row-level citation.

| Filename | Purpose | Source / authority |
| --- | --- | --- |
| `CN-MEA-SHIP-[ID]-INVOICE.pdf` | Commercial invoice | FIATA freight document standard (sea-export documentary set) |
| `CN-MEA-SHIP-[ID]-PACKING.pdf` | Packing list | FIATA documentary set |
| `CN-MEA-SHIP-[ID]-MSDS.pdf` | Material Safety Data Sheet | IATA Dangerous Goods Regulations (DGR) — MSDS requirement for lithium battery consignments |
| `CN-MEA-SHIP-[ID]-UN383.pdf` | UN 38.3 test summary | UN Manual of Tests and Criteria ST/SG/AC.10/11/Rev.7 §38.3 |
| `CN-MEA-SHIP-[ID]-BMS-DS.pdf` | Deye BMS-MAN-Rev-2025.04 (per-shipment) | Deye BOS-G product page (OEM context) |
| `CN-MEA-SHIP-[ID]-FW-NOTE.pdf` | Deye firmware release note for BOS-GPro | OEM-specific — per-shipment document (paired with BMS-MAN-Rev-2025.04 §4.2) |
| `CN-MEA-SHIP-[ID]-HARNESS.pdf` | Harness drawing (per BMS-MAN-Rev-2025.04 §9.1) | OEM-specific — per-shipment document |
| `CN-MEA-SHIP-[ID]-BUS-LOG.csv` | CAN bus handshake log (500 ms window per BMS-MAN-Rev-2025.04 §5.1) | Open Charge Alliance (CAN physical-layer reference) |
| `CN-MEA-SHIP-[ID]-TELEMETRY.csv` | Cell telemetry report (2.80–3.65 V / 0–45 °C per BMS-MAN-Rev-2025.04 §6) | Deye BMS-MAN-Rev-2025.04 §6.1–§6.2 |
| `CN-MEA-SHIP-[ID]-DTC.pdf` | Fault-code summary (28 DTCs per BMS-MAN-Rev-2025.04 Appendix B) | Deye BMS-MAN-Rev-2025.04 Appendix B; IEC 62619:2022 ed2 (qualification scope ref) |
| `CN-MEA-SHIP-[ID]-SOCSOH.pdf` | SOC/SOH cross-check sheet (±2 % / ±3 % per BMS-MAN-Rev-2025.04 §7) | Deye BMS-MAN-Rev-2025.04 §7.1, §7.4; Regulation (EU) 2023/1542 (SOH reporting scope ref for EU-routed lots) |
| `CN-MEA-SHIP-[ID]-BMS-CERT.pdf` | BMS communication test certificate | Internal document, archived with step-8 record per UN ST/SG/AC.10/11/Rev.7 §38.3 |

[Request the printable PDF checklist via the TradVolt RFQ form](/rfq/)

## 3. Timeline Table

| Phase | Activity | Indicative duration | Owner | Source |
| --- | --- | --- | --- | --- |
| T&minus;7 to T&minus;5 days | Dossier receipt and firmware cross-check (BMS-MAN-Rev-2025.04 §4.2) | 2 working days | Trade compliance officer | UN ST/SG/AC.10/11/Rev.7 §38.3 + Deye BMS-MAN-Rev-2025.04 §4.2 |
| T&minus;5 to T&minus;3 days | Physical inspection (torque 4.0 N·m §9.2) and CAN bus handshake (500 ms §5.1) | 2 working days | QA engineer | Deye BMS-MAN-Rev-2025.04 §5.1, §9.2; Open Charge Alliance (CAN ref) |
| T&minus;3 to T&minus;2 days | Cell telemetry (2.80–3.65 V / 0–45 °C §6), DTC scan (28 codes App. B), SOC/SOH (±2 % / ±3 % §7) | 1 working day | QA engineer | Deye BMS-MAN-Rev-2025.04 §6, §7, App. B; IEC 62619:2022 ed2 |
| T&minus;2 to T&minus;1 day | Test certificate issuance and archive | 1 working day | Trade compliance officer | UN ST/SG/AC.10/11/Rev.7 §38.3 |
| T-0 | Loading and corridor departure | Carrier cut-off | Carrier | ICC Incoterms 2020 (loading/hand-over cut-off scope reference) |
| In transit | Audit-trail availability on request | Voyage duration | Trade compliance officer | SARS Tariff · ITAC Import Control · GRA · URA · KEBS PVoC · Nigeria NSW (SONCAP) |

## 4. Indicative Cost Slots

Values below are indicative slots only. No hard prices are quoted. Every number is UNCERTAIN until confirmed against the named source.

| Cost slot | Indicative range (USD) | Status | Notes | Source |
| --- | --- | --- | --- | --- |
| Deye BOS-GPro diagnostic tool hire (per shipment) | slot — confirm with Deye | UNCERTAIN | OEM-specific tool per BMS-MAN-Rev-2025.04 §3.4 | Deye BOS-G product page |
| QA engineer time (steps 2–7) | slot — confirm internally | UNCERTAIN | Depends on lot size and module count (4–12 per system) | Internal accounting — no public URL |
| UN 38.3 test summary re-issue (if expired) | slot — confirm with test lab | UNCERTAIN | UN 38.3 reports carry a validity window per UN Manual | UN Manual of Tests and Criteria ST/SG/AC.10/11/Rev.7 §38.3 |
| Internal test certificate preparation | slot — confirm internally | UNCERTAIN | Administrative cost only | Internal accounting — no public URL |
| MEA-side customs broker handling | slot — confirm with broker | UNCERTAIN | Per shipment, per destination port | SARS Tariff · ITAC Import Control · GRA · URA · KRA Customs brochure (PDF) · Nigeria NSW |

## 5. HS / Duty Block — PENDING & Disclaimer

Duty rates for lithium batteries exported from China and imported at MEA destinations are **PENDING** lookup against the destination customs authority. The heading 8507.60 (Lithium-ion accumulators) is the working assumption; classification and rate must be confirmed at the destination before declaring.

| HS code (working assumption) | Description (working assumption) | Duty rate | Source to confirm |
| --- | --- | --- | --- |
| 8507.60 | Lithium-ion accumulators | PENDING — confirm at destination | SARS Tariff (ZA) · ITAC Import Control · GRA (GH) · URA (UG) · KRA Customs brochure (PDF) (KE) · Nigeria NSW (NG) |
| 8507.60 | Same heading, alternative wording | PENDING — confirm at destination | Same authorities as above |

**Disclaimer:** HS classifications and duty rates change. The block above is a working scaffold, not a ruling. Confirm with the destination customs authority and a licensed customs broker before declaring goods. Cross-references for non-MEA destinations (only if the buyer reroutes a lot): [EU TARIC consultation](https://ec.europa.eu/taxation_customs/dds2/taric/taric_consultation.jsp?Lang=en), [USITC HTS search](https://hts.usitc.gov/), [UK Global Tariff](https://www.trade-tariff.service.gov.uk/), [Japan Customs tariff schedule](https://www.customs.go.jp/english/tariff/), [Australian Border Force current tariff](https://www.abf.gov.au/importing-exporting-and-manufacturing/tariff-classification/current-tariff).

## 6. Request a Quote

For a corridor-specific quotation on BMS communication testing, document preparation, and MEA-side handling, contact TradVolt.

[Request a quotation for CN&rarr;MEA BMS communication testing](/rfq/)

## 7. Frequently Asked Questions

### 7.1 Why is BMS communication testing relevant to the CN→MEA corridor?

The corridor carries lithium batteries by sea. A working BMS is a precondition for safe transport under [UN Manual of Tests and Criteria ST/SG/AC.10/11/Rev.7 §38.3](https://unece.org/transport/dangerous-goods/un-manual-tests-and-criteria), and MEA-side handlers (per [SARS Tariff](https://www.sars.gov.za/customs-and-excise/tariff/), [GRA](https://gra.gov.gh/), [URA](https://www.ura.go.ug/) customs pages) may request evidence that the BMS responded correctly before the lot is released.

### 7.2 Which documents must the China exporter supply?

At minimum: commercial invoice, packing list, MSDS, UN 38.3 test summary, and Deye BMS-MAN-Rev-2025.04 (the BOS-GPro BMS service manual). The fixed filename list is in section 2. MSDS formatting aligns with [IATA DGR](https://www.iata.org/en/programs/cargo/dgr/).

### 7.3 Who owns each step of the process?

The trade compliance officer owns dossier receipt, certificate issuance, and audit-trail archive. The QA engineer owns firmware cross-check, physical inspection, bus handshake, telemetry read, DTC scan, and SOC/SOH cross-check. The carrier owns the loading cut-off per [ICC Incoterms 2020](https://iccwbo.org/business-solutions/incoterms-rules/incoterms-2020/).

### 7.4 How long does the full process take?

Indicatively seven calendar days from dossier receipt to certificate issuance (T−7 to T−1), per the timeline table and the HowTo totalTime field. Excludes the sea-voyage segment.

### 7.5 Are the cost figures in this guide firm?

No. They are indicative slots. Every cost slot is marked UNCERTAIN until confirmed against Deye (BMS-MAN-Rev-2025.04 §3.4 for tool hire), the test lab (UN 38.3 re-issue), and the destination customs broker.

### 7.6 Which BMS product family is referenced?

This guide is pinned to the **Deye BOS-GPro** high-voltage LFP battery family (5.12 kWh / 51.2 V / 100 Ah modules, 20.48–61.44 kWh systems) governed by **Deye BMS-MAN-Rev-2025.04**. For non-BOS-GPro BMS hardware (Sungrow SBR064–256, GoodWe ET-series bank, CATL ESS rack, BYD HVS/HVM) re-qualify steps 2–7 against that OEM's own service manual revision.

## 8. Sources & Claim-Row Footer

Named documents are references; confirm the relevant revision and scope before use. No blogs, forums, or AI-generated material are cited.

| Claim | Source (URL) | File / section |
| --- | --- | --- |
| Lithium batteries classified under HS heading 8507.60 (Lithium-ion accumulators) | SARS Customs & Excise Tariff · ITAC Import Control · GRA · URA · KRA Customs brochure (PDF) · Nigeria NSW | HS nomenclature chapter 85 / heading 8507; confirm at destination |
| UN 38.3 testing required for transport of lithium batteries | UN Manual of Tests and Criteria ST/SG/AC.10/11/Rev.7 §38.3 | UN ST/SG/AC.10/11/Rev.7 §38.3 (lithium-battery provisions) |
| Industrial lithium cell/battery safety qualification (ESS scope ref) | IEC 62619:2022 ed2 — Safety requirements for secondary lithium cells and batteries for use in industrial applications incl. stationary/ESS | IEC 62619:2022 ed2 (TC 21/SC 21A) |
| Portable lithium cell safety standard (scope ref for portable banks) | IEC 62133-2:2017 — Secondary cells and batteries containing alkaline or other non-acid electrolytes — Safety requirements for portable sealed secondary lithium cells | IEC 62133-2:2017 |
| State-of-health reporting scope (EU-routed lots) | Regulation (EU) 2023/1542 — EU Battery Regulation | Regulation (EU) 2023/1542 (state-of-health reporting scope) |
| EV conductive-charging scope reference (BMS-on-EV context only) | IEC 61851-1:2017 — Electric vehicle conductive charging system, Part 1: General requirements | IEC 61851-1:2017 (TC 69; scope reference; not a BMS test standard) |
| CAN / OCPP physical-layer reference for bus-handshake step | Open Charge Alliance (OCPP / CAN) | OCA protocol reference |
| OEM product page for Deye BOS-GPro LFP battery family | Deye Inverter — BOS-G high-voltage LFP battery solutions | BOS-G: 5.12 kWh / 51.2 V / 100 Ah module; systems 20.48–61.44 kWh from 4–12 modules; >6000 cycles; intelligent BMS with aerosol fire extinguishing |
| OEM BMS service manual (governing numeric limits for this guide) | Deye BMS-MAN-Rev-2025.04 — "Deye BOS-GPro BMS Service Manual, Revision 2025.04" (per-shipment PDF; manual revision referenced in `CN-MEA-SHIP-[ID]-BMS-DS.pdf`) | §4.2 firmware map; §5.1 CAN timeout 500 ms; §6.1 cell voltage 2.80–3.65 V; §6.2 temperature 0–45 °C / −20–55 °C; §7.1 SOC tol ±2 %; §7.4 SOH tol ±3 %; §8.3 1500 V DC insulation; §9.1 pinout; §9.2 power-terminal torque 4.0 N·m ± 0.5 N·m; Appendix B 28-DTC map |
| IATA Dangerous Goods Regulations — MSDS requirement for lithium-battery consignments | IATA Dangerous Goods Regulations (DGR) | IATA DGR lithium-battery provisions |
| Loading cut-off / handover scope reference for timeline T-0 | ICC Incoterms 2020 | ICC Incoterms 2020 rules page |
| MEA destination customs / import-control pages | SARS Tariff · ITAC Import Control · GRA · URA · KRA Customs brochure (PDF) · KRA iCMS rollout notice · KEBS PVoC · Nigeria NSW (SONCAP) | Customs import procedure / permit pages; deep tariff URLs vary by destination |
| Non-MEA tariff lookup cross-references (only if buyer reroutes a lot) | EU TARIC · USITC HTS · UK Global Tariff · Japan Customs tariff schedule · ABF current tariff | Tariff lookup tools |
| Energy-storage / inverter OEM product pages (alternative-BMS scope context only) | CATL ESS · Sungrow · Huawei FusionSolar · LONGi · JinkoSolar · Trina Solar · Growatt · EVE Energy · BYD | OEM landing pages; cited only when an alternative-BMS re-qualification is triggered (this guide is pinned to Deye BOS-GPro) |

**Substitution rule:** All numeric limits in this guide (firmware string, connector pinout, bus-handshake timeout window = 500 ms, cell voltage tolerance window = 2.80–3.65 V, temperature tolerance window = 0–45 °C charge / −20–55 °C discharge, SOC tolerance = ±2 %, SOH tolerance = ±3 %, DC insulation = 1500 V DC / 1 min, power-terminal torque = 4.0 N·m ± 0.5 N·m, 28-code DTC map in Appendix B) are defined in Deye BMS-MAN-Rev-2025.04. Substitute BMS model or manual revision triggers full re-qualification of steps 2–7.
