---
title: "Process: Solar Module Connector Torque Audit — China to Lithuania Corridor | Tradvolt"
source_url: "https://tradvolt.com/en/guides/process-solar-module-connector-torque-audit-china-to-lithuania-corridor-tradvolt/"
lang: "en"
description: "Standard operating procedure for auditing torque values on solar module DC connectors (Stäubli MC4 / MC4-Evo 2 on Trina TSM-NEG19RC.05 modules) along the CN→LT logistics corridor."
generator: "tradvolt-tier-c-edge-md"
---

# Solar Module Connector Torque Audit — Corridor CN→LT

Standard Operating Procedure · Vertical: LFP (Lithium Iron Phosphate) Energy Storage + PV Modules · Issued by TradVolt OÜ · Evidence-date: 2026-09-22

**VERDICT — PASS criterion and decision band.** The audit is modelled on **Stäubli MC4 / MC4-Evo 2 connectors factory-fitted to Trina Solar TSM-NEG19RC.05 (Vertex N series) bifacial modules**. Acceptance requires each sampled connector pair to be torqued within the OEM-published tolerance band of the *Stäubli MC4 / MC4-Evo 2 Assembly Instructions MA213* (rev. 2022-08) — i.e. a tightening torque of **2.0 Nm ± 0.2 Nm for the cable gland nut**; readings outside this band are FAIL. The target CN→LT transit window is **34–45 days end-to-end** (2–4 d road to CN port + 1–2 d CN export + 30–38 d sea to Klaipėda + 1–3 d LT clearance + 1 d last-mile). **Limitation:** torque figures and cycle ratings are confirmed at RFQ against the OEM datasheet of the actual shipped lot — see Section 4 model assumption.

| Item | Value | Source / status |
| --- | --- | --- |
| Module model (computed) | Trina Solar TSM-NEG19RC.05 (Vertex N) | Trina product page (exact datasheet at RFQ) |
| Connector family | Stäubli MC4 / MC4-Evo 2 | Stäubli MA213 assembly instructions (rev. 2022-08) |
| Pass torque band | 2.0 Nm ± 0.2 Nm (cable gland nut) | Stäubli MA213 rev. 2022-08 — model assumption until RFQ confirms |
| AQL level | 1.0 major / 2.5 minor, Level II | ISO 2859-1:1999 |
| CN→LT target window | 34–45 days | TradVolt corridor log 2024–2025 |
| Discharge port | Klaipėda, LT | Fixed corridor scope |

## 1. Scope and Applicability

Applies to framed PV modules fitted with factory-installed **Stäubli MC4 / MC4-Evo 2** DC connectors (positive and negative leads) on **Trina Solar TSM-NEG19RC.05 (Vertex N)** modules, sourced from OEM facilities in China and discharged at Klaipėda, LT. Torque verification is performed on the cable gland nut of the male and female connector pair, not on module-to-rail clamps. The connector reference is the *Stäubli MC4 / MC4-Evo 2 Assembly Instructions MA213 rev. 2022-08*; the module reference is the *Trina Solar TSM-NEG19RC.05 product datasheet (Vertex N series)*.

## 2. Reference Documents

- Stäubli MC4 / MC4-Evo 2 Assembly Instructions MA213, rev. 2022-08 — connector mechanical specifications and assembly instructions (OEM manual)

- Trina Solar TSM-NEG19RC.05 product datasheet (Vertex N series) — module specification, including junction-box / connector reference

- UL 61730-1:2022 — Photovoltaic (PV) Module Safety Qualification — Part 1

- IEC 62852:2014+AMD1:2020 — Connectors for DC-application in photovoltaic systems — Safety requirements and tests (IEC webstore catalogue query, see Section 4)

- ISO 2859-1:1999 — Sampling procedures for inspection by attributes, AQL tables

- ICC Incoterms® 2020 — published by the International Chamber of Commerce

- FIATA Multimodal Transport Document framework — negotiable MT document (FBL)

- EU TARIC consultation tool — official EU customs HS/duty lookup

- PRC General Administration of Customs — CN export clearance portal (English)

## 3. Step Sequence

| Step # | Action | Owner | Input doc | Output doc | Done-when |
| --- | --- | --- | --- | --- | --- |
| 1 | Receive shipping file (PO, packing list, OEM torque sheet for Stäubli MC4 / MC4-Evo 2 on Trina TSM-NEG19RC.05) and confirm audit scope with buyer | TradVolt Order Desk | Buyer PO, OEM torque datasheet | TV-AUDIT-INT-001 internal intake form | Scope signed off by buyer email |
| 2 | Confirm Incoterms® 2020 term (e.g. FOB Shanghai / CIF Klaipėda), allocate risk per ICC rules, and validate HS classification against TARIC | TradVolt Trade Compliance | PO, commercial invoice draft | TV-COMPL-002 compliance memo | Incoterms code and HS code locked |
| 3 | Notify OEM of pre-shipment torque audit; align on witness window at the production line for Trina TSM-NEG19RC.05 | TradVolt China Sourcing Office | OEM contact, production plan | TV-CN-003 audit request notice | OEM confirms production line and date |
| 4 | Draw sample using ISO 2859-1 AQL; lot size = pallet quantity; AQL 1.0 inspection level II for connectors | TradVolt QA Inspector (CN) | Packing list, lot size | TV-QA-004 AQL sample sheet | Sample size recorded with justification |
| 5 | Measure torque on sampled Stäubli MC4 / MC4-Evo 2 male/female pairs using calibrated digital torque wrench; compare against the OEM-specified 2.0 Nm ± 0.2 Nm band per Stäubli MA213 rev. 2022-08 | TradVolt QA Inspector (CN) | Calibrated wrench, OEM torque spec | TV-QA-005 torque measurement log | Each reading logged with Nm and pass/fail |
| 6 | Record any deviation > ±0.2 Nm from the Stäubli 2.0 Nm specification and note connector batch/lot | TradVolt QA Inspector (CN) | TV-QA-005 | TV-QA-006 deviation register | All deviations listed by batch |
| 7 | Acceptance decision: PASS if all sampled connectors measure within 2.0 Nm ± 0.2 Nm and ISO 2859-1 AQL critical threshold is met; REJECT if acceptance number exceeded | TradVolt QA Lead | TV-QA-005, TV-QA-006 | TV-QA-007 pass/fail decision | Decision countersigned by OEM rep |
| 8 | Load container, seal, and complete CN export clearance via the PRC General Administration of Customs | Freight Forwarder + TradVolt China Office | Commercial invoice, packing list, customs declaration | CN export clearance receipt | Container sealed and customs-released |
| 9 | Sea freight CN port (Shanghai / Ningbo / Shenzhen) → Klaipėda under FIATA Multimodal Transport Document (FBL) | Freight Forwarder | FIATA FBL/BL | Onboard BL | Vessel departs CN port |
| 10 | LT import clearance at Klaipėda; HS code declared via TARIC lookup, duties/taxes posted, release granted | LT Customs Broker | BL, commercial invoice, packing list | LT customs release note | Container released for collection |
| 11 | Arrival audit at TradVolt Klaipėda hub: spot-check torque on 10 randomly drawn Stäubli MC4 / MC4-Evo 2 connectors from the received lot | TradVolt QA Inspector (LT) | Calibrated wrench, TV-QA-005 | TV-QA-011 arrival audit log | Spot-check readings filed |
| 12 | Compile final audit report, archive torque logs, and hand file to buyer | TradVolt Order Desk | TV-QA-007, TV-QA-011 | TV-AUDIT-FINAL-012 PDF report | Report delivered to buyer within 48 h of arrival |

## 4. Acceptance Criteria

Each sampled Stäubli MC4 / MC4-Evo 2 connector pair fitted to Trina Solar TSM-NEG19RC.05 modules is torqued to the OEM-specified value published in *Stäubli Assembly Instructions MA213 rev. 2022-08*: **2.0 Nm ± 0.2 Nm for the cable gland nut**. A reading within this band is recorded as PASS on TV-QA-005. Any reading outside the band is recorded as FAIL on TV-QA-006.

[Claim: Tightening torque 2.0 Nm ± 0.2 Nm for MC4 / MC4-Evo 2 cable gland nut | Src: Stäubli MC4 / MC4-Evo 2 Assembly Instructions MA213 rev. 2022-08 | URL: https://www.staubli.com/global/en/electrical-connectors/products/mc4.html | accessed 2026-09-22 — model assumption until confirmed at RFQ against lot-specific datasheet]

[Claim: Connector safety design and test methods are governed by IEC 62852:2014+AMD1:2020 | Src: IEC 62852 catalogue entry | URL: https://webstore.iec.ch/en/products/?q=62852 | accessed 2026-09-22]

[Claim: Connectors for PV systems are evaluated to UL 61730-1:2022 (Module Safety Qualification, Part 1) | Src: UL 61730-1 | URL: https://www.shopulstandards.com/ProductDetail.aspx?productId=UL61730-1 | accessed 2026-09-22]

[Claim: Sample size and acceptance number derived from ISO 2859-1:1999 AQL tables | Src: ISO 2859-1:1999 | URL: https://www.iso.org/search.html?q=2859 | accessed 2026-09-22]

[Claim: Trina Vertex N module family includes the TSM-NEG19RC.05 (bifacial mono-crystalline) | Src: Trina Solar Vertex N product page | URL: https://www.trinasolar.com/en-glb/product/vertex-n-plus | accessed 2026-09-22 — module datasheet confirmed at RFQ]

## 5. Sampling Logic (AQL)

Lot = pallet (modules fitted with Stäubli MC4 / MC4-Evo 2). Inspection level = General Inspection Level II per ISO 2859-1:1999. AQL = 1.0 for major defects (incorrect torque, damaged thread, cracked housing), AQL = 2.5 for minor defects (cosmetic). Sample size code letter and acceptance number (Ac) / rejection number (Re) are taken from the ISO 2859-1 tables at the time of audit; both numbers are written into TV-QA-004.

## 6. Tools and Calibration

Digital torque wrench covering 0.5–5.0 Nm (covering the Stäubli 2.0 Nm target), calibrated within the previous 12 months. Calibration certificate reference is recorded on TV-QA-005. A backup mechanical wrench is kept in the QA kit.

## 7. Logistics Corridor — Timeline and Dependencies

| Leg | Mode | Typical duration | Dependency | Owner |
| --- | --- | --- | --- | --- |
| OEM plant → CN port (Shanghai / Ningbo / Shenzhen) | Road | 2–4 days | Pre-shipment audit signed off (Step 7) | Freight Forwarder |
| CN export clearance | Customs | 1–2 working days | Commercial invoice, packing list, customs declaration | Freight Forwarder + TradVolt China Office |
| CN port → Klaipėda | Sea (FCL) | 30–38 days | Vessel schedule, FIATA FBL issued | Shipping Line |
| LT import clearance (Klaipėda) | Customs | 1–3 working days | BL, invoice, packing list, TARIC-based declaration | LT Customs Broker |
| Klaipėda port → TradVolt hub | Road / rail | 1 day | Customs release note (Step 10) | TradVolt Klaipėda Logistics |
| **Total CN→LT window** | Multimodal | **34–45 days** | All Steps 1–11 closed | TradVolt OÜ |

[Claim: Corridor transit times based on TradVolt operational data for FCL sailings CN → Klaipėda | Src: TradVolt internal corridor log 2024-2025 | accessed 2026-09-22]

[Claim: Incoterms 2020 defines risk transfer and cost allocation between buyer and seller | Src: ICC Incoterms® 2020 | URL: https://iccwbo.org/business-solutions/incoterms-rules/incoterms-2020/ | accessed 2026-09-22]

[Claim: The FIATA Multimodal Transport Document (FBL) is the standard negotiable MT document for combined transport | Src: FIATA documents index | URL: https://fiata.org/ | accessed 2026-09-22]

[Claim: CN export clearance is filed through the official PRC customs portal (English) | Src: PRC General Administration of Customs | URL: http://english.customs.gov.cn/ | accessed 2026-09-22]

[Claim: LT import clearance uses the EU TARIC consultation tool | Src: European Commission TARIC | URL: https://ec.europa.eu/taxation_customs/dds2/taric/taric_consultation.jsp?Lang=en | accessed 2026-09-22]

## 8. Cost Slots

All cost figures in this section are indicative and depend on container size, fuel surcharge, peak-season premium, and current duty/tax postings in TARIC. They are UNCERTAIN until a specific PO is quoted.

| Cost item | Basis | Status |
| --- | --- | --- |
| Pre-shipment torque audit (Steps 1–7) | Per man-day, CN, inclusive of calibrated wrench | indicative |
| Sea freight CN → Klaipėda (FCL 40' HC) | Per container, subject to Bunker Adjustment Factor | indicative · UNCERTAIN |
| CN export clearance fees | Per shipment, set by forwarder | indicative · UNCERTAIN |
| LT import duties and VAT | Calculated against declared CIF and current TARIC postings | indicative · UNCERTAIN |
| Arrival audit at TradVolt hub (Step 11) | Per lot, inclusive of spot-check torque log | indicative |

## 9. Duty / HS Block

**HS code for framed PV modules (Trina TSM-NEG19RC.05) with mounted Stäubli MC4 / MC4-Evo 2 DC connectors:** PENDING — lookup against the current EU TARIC query result and the PRC customs tariff schedule before each shipment.

**EU import duty rate:** PENDING — lookup at the time of quotation via the EU TARIC consultation tool (https://ec.europa.eu/taxation_customs/dds2/taric/taric_consultation.jsp?Lang=en).

**VAT rate (LT):** PENDING — lookup at the time of quotation against the current Lithuanian VAT schedule.

**Official portals consulted:**

- EU TARIC consultation (HS/duty lookup) — [https://ec.europa.eu/taxation_customs/dds2/taric/taric_consultation.jsp?Lang=en](https://ec.europa.eu/taxation_customs/dds2/taric/taric_consultation.jsp?Lang=en)

- PRC General Administration of Customs (CN export) — [http://english.customs.gov.cn/](http://english.customs.gov.cn/)

Disclaimer: HS classification and duty/VAT rates are not hardcoded here because they depend on the exact panel model, wattage class, declared use (grid-tied vs. storage-coupled), and current TARIC postings. TradVolt re-verifies all of the above on every quote. No rate in this SOP is binding.

## 10. Documents on File — Checklist

The following files are produced or received during the audit. Literal filenames are listed for buyer reference:

- `TV-AUDIT-INT-001_intake_form.pdf`

- `TV-COMPL-002_compliance_memo.pdf`

- `TV-CN-003_audit_request_notice.pdf`

- `TV-QA-004_AQL_sample_sheet.xlsx`

- `TV-QA-005_torque_measurement_log.xlsx`

- `TV-QA-006_deviation_register.xlsx`

- `TV-QA-007_pass_fail_decision.pdf`

- `CN_export_clearance_receipt.pdf`

- `FIATA_FBL_multimodal_BL.pdf`

- `LT_customs_release_note.pdf`

- `TV-QA-011_arrival_audit_log.xlsx`

- `TV-AUDIT-FINAL-012_report.pdf`

- `OEM_torque_datasheet_buyer_supplied.pdf` (Stäubli MA213 rev. 2022-08 + Trina TSM-NEG19RC.05 datasheet)

- `torque_wrench_calibration_certificate.pdf`

## 11. Related Reference Material

Documents cited in this SOP are listed for buyer reference. To request a downloadable PDF copy of the TradVolt SOP, use the RFQ form in Section 12.

## 12. Request a Quote

Send your module OEM, connector family, expected lot size, target CN port, and Incoterms® 2020 code. TradVolt replies within 48 working hours with a fixed quote covering Steps 1–12 above. Scope reference: **Stäubli MC4 / MC4-Evo 2 on Trina TSM-NEG19RC.05 modules, CN→LT corridor, 34–45 day window**.

[Request Quote — replies in 48h](/rfq/)

### Document control

Owner: TradVolt OÜ, Tallinn / Klaipėda. Reviewed annually. Evidence-date: 2026-09-22. Last review date: 2026-09-22. Next review: 2027-09-22.
