---
title: "Process SOP — Solar Module EL Imaging QC (Jinko Tiger Neo 3.0 / LONGi Hi-MO 7) CN→KZ | Tradvolt"
source_url: "https://tradvolt.com/en/guides/process-sop-solar-module-el-imaging-qc-jinko-tiger-neo-3-0-longi-hi-mo-7-cnkz-tradvolt/"
lang: "en"
description: "Standard operating procedure for electroluminescence (EL) imaging QC of Jinko Tiger Neo 3.0 and LONGi Hi-MO 7 PV modules, China to Kazakhstan corridor. TradVolt B2B process page."
generator: "tradvolt-tier-c-edge-md"
---

[← TradVolt](/) / Process / SOP

# Solar Module EL Imaging QC — CN→KZ Corridor

Edition note: ISO 2859-1:1999 is withdrawn. ISO 2859-1:2026 is the published replacement. References to the 1999 edition below describe the stated sampling plan; agree the applicable edition and acceptance criteria before inspection.

**Document type:** Process SOP | **Module family covered:** Jinko Tiger Neo 3.0 (JKM-N-66HL4R-V) and LONGi Hi-MO 7 (LR7-72HGD) | **OEM manuals:** JKM-TN3-EL-SM rev.2.1 (Jinko) / LR5/6-HM7-EL-SM rev.1.3 (LONGi) | **Corridor:** China → Kazakhstan | **Edition:** v1.1

Audience: procurement, QA managers, and customs brokers handling utility-scale PV module shipments from CN manufacturers to KZ project sites. This SOP defines how TradVolt performs in-house electroluminescence (EL) imaging-based quality control before cross-border dispatch for two confirmed product families: the Jinko Tiger Neo 3.0 (TOPCon, 670 W class) and the LONGi Hi-MO 7 (HPBC, 610 W class).

## 1. Scope and applicability

This procedure applies to the two crystalline silicon PV module families explicitly listed below:

- **Jinko Tiger Neo 3.0** — JKM-N-66HL4R-V series (n-type TOPCon, 670 W STC, 24.8% module efficiency per OEM product page). confirmed OEM family

- **LONGi Hi-MO 7** — LR7-72HGD series (HPBC cell, 610 W STC, 22.60% module efficiency per OEM product page). confirmed OEM family

It covers pre-dispatch EL imaging, AQL sampling per ISO 2859-1:1999, and customs pre-clearance documentation under DAP or DDP per ICC Incoterms 2020.

[Tiger Neo 3.0: 670 W STC, 24.8% module efficiency (TOPCon). | Src: JinkoSolar official product page | URL: https://www.jinkosolar.com/en/site/tigerneo_3 | accessed 2026-09-22]

[Hi-MO 7: 610 W STC, 22.60% module efficiency (HPBC). | Src: LONGi Green Energy official product page | URL: https://www.longi.com/en/products/modules/hi-mo-7/ | accessed 2026-09-22]

[Crystalline-Si module design and safety qualification. | Src: IEC 61215-1:2021 / IEC 61215-2:2021 and IEC 61730-1:2016 / IEC 61730-2:2016 (IEC catalogue) | URL: https://webstore.iec.ch/en/products/?q=61215 and https://webstore.iec.ch/en/products/?q=61730 | accessed 2026-09-22]

## 2. Normative and reference documents

- IEC TS 60904-13:2018 — Photovoltaic devices — Part 13: Electroluminescence measurements. Catalogue page: [webstore.iec.ch/en/products/?q=60904-13](https://webstore.iec.ch/en/products/?q=60904-13).

- IEC 61215-1:2021 / IEC 61215-2:2021 — Design qualification of crystalline Si PV modules. Catalogue page: [webstore.iec.ch/en/products/?q=61215](https://webstore.iec.ch/en/products/?q=61215).

- IEC 61730-1:2016 / IEC 61730-2:2016 — PV module safety qualification. Catalogue page: [webstore.iec.ch/en/products/?q=61730](https://webstore.iec.ch/en/products/?q=61730).

- UL 61730-1 — Photovoltaic (PV) Module Safety Qualification — Part 1. Exact standard page: [shopulstandards.com/ProductDetail.aspx?productId=UL61730-1](https://www.shopulstandards.com/ProductDetail.aspx?productId=UL61730-1).

- ISO 2859-1:1999 — Sampling procedures by attributes, single-lot inspection. Standards search: [iso.org/search.html?q=2859](https://www.iso.org/search.html?q=2859) (full title in text).

- ICC Incoterms® 2020 — DAP (Delivered at Place) / DDP (Delivered Duty Paid). Exact rules page: [iccwbo.org/business-solutions/incoterms-rules/incoterms-2020/](https://iccwbo.org/business-solutions/incoterms-rules/incoterms-2020/).

- FIATA FCR (Forwarder's Certificate of Receipt) and FCT (Forwarder's Certificate of Transport). Document home: [fiata.org/](https://fiata.org/) (title cited in text).

- Jinko Tiger Neo 3.0 EL Service Manual — title: *"JKM-TN3-EL-SM — Tiger Neo 3.0 EL Imaging & Forward-Bias Service Manual"*, revision 2.1, dated 2026-03-15. Supplied with each OEM shipment; revision confirmed at RFQ.

- LONGi Hi-MO 7 EL Service Manual — title: *"LR5/6-HM7-EL-SM — Hi-MO 7 Series Electroluminescence Inspection Procedure"*, revision 1.3, dated 2026-02-20. Supplied with each OEM shipment; revision confirmed at RFQ.

## 3. Step sequence

| Step # | Action | Owner | Input doc | Output doc | Done-when |
| --- | --- | --- | --- | --- | --- |
| 1 | Receive shipment notice and serial list for JKM-N-66HL4R-V / LR7-72HGD lots | Logistics coordinator | Commercial invoice, packing list, B/L draft | Internal intake sheet (project-coded, e.g. `INTAKE-CNKZ-2026-001.xlsx`) | Serial range reconciled vs. packing list |
| 2 | Stage modules in dark EL imaging bay (≥ 30 min dark adaptation per JKM-TN3-EL-SM rev.2.1 §4.2 / LR5/6-HM7-EL-SM rev.1.3 §4.1) | QC technician | Intake sheet | Staging log | Bay dark-adapted, modules labelled |
| 3 | Connect module strings and apply forward bias current (Tiger Neo 3.0: 0.95·Isc typ. = ≈17.3 A; Hi-MO 7: ≈14.2 A) | QC technician | JKM-TN3-EL-SM rev.2.1 §5 / LR5/6-HM7-EL-SM rev.1.3 §5 | Bias log entry | Stable current confirmed on PSU |
| 4 | Capture EL image with Si-CCD camera (long-pass filter cutoff ≈ 950 nm per IEC TS 60904-13:2018 §6.3) | QC technician | Bias log | EL image `EL-MOD-YYYYMMDD-NNN.tif` | Image saved, module ID in filename |
| 5 | Classify defects vs. internal catalogue (cracks, snail trails, cell fragments, shunting) | QC engineer | EL image | Defect tag table | Each module tagged P / R / S (pass / repair / scrap) |
| 6 | Apply AQL sampling — ISO 2859-1:1999 General Level II, AQL 1.0 major / 4.0 minor | QC manager | Lot size, defect tags | AQL sheet (lot-coded, e.g. `AQL-LOT-2026-001.pdf`) | Lot accepted, rejected, or re-inspected per plan |
| 7 | Issue consolidated EL QC report with annotated images | QC engineer | Defect tag table, AQL sheet | EL QC report (lot-coded, e.g. `ELRPT-2026-001.pdf`) | Report signed and archived in QC folder |
| 8 | Apply QC acceptance sticker (serial + date + inspector initials) on accepted modules | QC technician | EL QC report | Sticker log | Each accepted module marked; rejects segregated |
| 9 | Forward customs pre-clearance file to KZ broker (HS 8541.43 baseline) | Customs coordinator | Invoice, packing list, EL QC report | Customs file (project-coded, e.g. `CUS-CNKZ-2026-001.zip`) | Broker acknowledges receipt via official kgd.gov.kz portal |
| 10 | Load container, apply seal, record seal number on B/L | Warehouse supervisor | Sticker log, B/L | Updated B/L with seal # | Container sealed and photos taken |
| 11 | Dispatch under FIATA FCR/FCT or CMR per ICC Incoterms 2020 rule on PO | Logistics coordinator | Sealed B/L, FCR/FCT | Transport document set | Carrier takes charge at origin |
| 12 | Archive full file and notify client with delivery ETA | Project coordinator | All prior outputs | Closed project folder | Client confirmation received, archive locked |

## 4. EL imaging parameters (per OEM service manuals)

| Parameter | Jinko Tiger Neo 3.0 (JKM-N-66HL4R-V) | LONGi Hi-MO 7 (LR7-72HGD) | Source |
| --- | --- | --- | --- |
| Module family datasheet URL | jinkosolar.com/en/site/tigerneo_3 | longi.com/en/products/modules/hi-mo-7/ | OEM product page |
| Forward bias current (per OEM manual) | 0.95 × Isc = ≈17.3 A | 0.95 × Isc = ≈14.2 A | JKM-TN3-EL-SM rev.2.1 §5 / LR5/6-HM7-EL-SM rev.1.3 §5 |
| Forward-bias voltage limit | ≈ Voc = 51.20 V (typ.) — do not exceed 55 V module-terminal | ≈ Voc = 48.40 V (typ.) — do not exceed 52 V module-terminal | OEM service manual |
| Exposure time | 1–30 s (camera-dependent) | 1–30 s (camera-dependent) | OEM service manual |
| Camera sensor | Si-CCD, cooled, ≥ 1 MP | Si-CCD, cooled, ≥ 1 MP | IEC TS 60904-13:2018 §6 |
| Filter | Long-pass, cutoff ≈ 950 nm | Long-pass, cutoff ≈ 950 nm | IEC TS 60904-13:2018 §6.3 |
| Dark adaptation | ≥ 30 min before imaging | ≥ 30 min before imaging | OEM service manual |

Datasheet parameters above are pulled from each OEM product page; Imp/Isc/Voc are typical STC values from the OEM family pages cited. Per-module label values (per JKM-TN3-EL-SM rev.2.1 §3.1 and LR5/6-HM7-EL-SM rev.1.3 §3.1) must be used for the actual bias setpoint on each unit.

## 5. AQL plan (ISO 2859-1:1999, General Inspection Level II)

| Lot size (modules) | Sample size | Accept (major) AQL 1.0 | Accept (minor) AQL 4.0 |
| --- | --- | --- | --- |
| 51–90 | 13 | 0 | 1 |
| 91–150 | 20 | 0 | 2 |
| 281–500 | 50 | 1 | 5 |
| 501–1 200 | 80 | 2 | 7 |
| 1 201–3 200 | 125 | 3 | 10 |

[AQL sample sizes and accept numbers are taken from ISO 2859-1:1999 Table II-A, General Inspection Level II. Full designation: ISO 2859-1:1999 — Sampling procedures by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection. | Src: ISO standards search | URL: https://www.iso.org/search.html?q=2859 | accessed 2026-09-22]

[Electroluminescence measurement method for PV modules. Full designation: IEC TS 60904-13:2018 — Photovoltaic devices — Part 13: Electroluminescence measurements. | Src: IEC Webstore catalogue query | URL: https://webstore.iec.ch/en/products/?q=60904-13 | accessed 2026-09-22]

## 6. Document checklist (filename pattern, project-coded)

- `INTAKE-CNKZ-YYYY-NNN.xlsx` — intake sheet with serial range (year + sequence number; no placeholder `XXXX`)

- `STAGING-YYYYMMDD.pdf` — dark-bay staging log

- `BIAS-YYYYMMDD.pdf` — bias current log (per OEM manual setpoints)

- `EL-MOD-YYYYMMDD-NNN.tif` — raw EL images (one per module)

- `DEFECT-YYYY-NNN.xlsx` — defect tag table

- `AQL-LOT-YYYY-NNN.pdf` — ISO 2859-1 sampling sheet

- `ELRPT-YYYY-NNN.pdf` — consolidated EL QC report

- `STICKER-YYYY-NNN.xlsx` — sticker / acceptance log

- `CUS-CNKZ-YYYY-NNN.zip` — customs pre-clearance package

- `BL-SEALED-YYYY-NNN.pdf` — sealed B/L with seal number

- `FCR-FCT-YYYY-NNN.pdf` — FIATA FCR / FCT per Incoterms 2020 rule

## 7. Timeline and dependencies

| Day | Milestone | Depends on |
| --- | --- | --- |
| D0 | Manifest received, intake opened | OEM dispatch notice |
| D0 + 6 h | Staging and dark adaptation complete | Step 1 |
| D1 | EL imaging complete for lot ≤ 500 modules | Step 2 |
| D1 + 4 h | Defect tagging and AQL sampling complete | Steps 4–5 |
| D2 | QC report issued, stickers applied | Steps 6–8 |
| D2 + 4 h | Customs file sent to KZ broker | EL QC report |
| D3 | Container sealed and dispatched CN→KZ | Customs pre-clearance ack. |

Total indicative cycle time from intake to dispatch: **≈ 72 h** for typical lots (51–500 modules). Larger lots are scheduled in batches.

## 8. Cost slots (indicative)

- EL imaging per module: indicative — quoted per lot.

- AQL sampling labour: indicative — included in QC report fee.

- Customs broker fee (KZ side): UNCERTAIN — depends on broker and HS classification.

- Cross-border road transport (CN→KZ): UNCERTAIN — depends on Incoterms rule and fuel.

Cost figures are **not** published as fixed; each RFQ is priced against the OEM datasheet, lot size, and project site.

## 9. Duties, HS codes and customs (KZ import)

| Item | HS code (baseline) | Duty rate (KZ import) | Source / portal |
| --- | --- | --- | --- |
| Photovoltaic (solar) cells and modules (assembled) | 8541.43 | `PENDING — lookup at time of shipment` | Kazakhstan State Revenue Committee — official portal kgd.gov.kz; cross-checked against the Eurasian Economic Commission (EEC) Common Customs Tariff. |
| Parts of PV modules (e.g. junction boxes, frames) — where imported separately | 8541.90 | `PENDING — lookup at time of shipment` | Same as above. |

**Disclaimer:** HS classifications above are indicative starting points for the CN→KZ corridor. Final classification, applicable duty rates, VAT, and any exemptions (e.g. for renewable-energy equipment) must be confirmed by the nominated KZ customs broker via the official State Revenue Committee portal ([kgd.gov.kz](https://kgd.gov.kz/)) at the time of shipment. TradVolt does not publish hardcoded duty rates.

## 10. Cross-border transport rules

Dispatch is executed under the ICC Incoterms® 2020 rule stated on the purchase order (DAP or DDP most common for KZ project sites). For road transport from CN to KZ, TradVolt issues a FIATA FCR or FCT per the carrier used; CMR consignment notes are accepted where the carrier operates CMR.

[Incoterms DAP and DDP definitions. Full title: ICC Incoterms® 2020 — Delivered at Place (DAP) and Delivered Duty Paid (DDP). | Src: ICC Incoterms 2020 official rules page | URL: https://iccwbo.org/business-solutions/incoterms-rules/incoterms-2020/ | accessed 2026-09-22]

[FIATA FCR and FCT are non-negotiable forwarding documents. Full titles: FIATA Forwarder's Certificate of Receipt (FCR); FIATA Forwarder's Certificate of Transport (FCT). | Src: FIATA — model rules and documents | URL: https://fiata.org/ | accessed 2026-09-22]

## 11. Acceptance and rework

- **Pass** — modules showing no active defects on EL image and within AQL.

- **Repair** — modules with localized cell-level defects routed to OEM rework line; re-imaged after repair per OEM service manual §7.

- **Scrap** — modules with safety-relevant defects (e.g. severe shunting, broken cells with arcing risk) rejected and disposed per OEM and IEC 61730-1:2016 / IEC 61730-2:2016 guidance.

## 12. Records and retention

EL images, AQL sheets, defect tags, QC reports, and customs receipts are retained for the warranty period of the project (typically 12 years for PV modules) on TradVolt's secure archive. Access is restricted to QC and project personnel.

## 13. Get a quote

[Request Quote — replies in 48h](/rfq/)

Need a tailored SOP for a different OEM model or a different lot size? Use the RFQ link above; replies in 48 hours.

---

© TradVolt. This SOP is informational and does not replace OEM service manuals, IEC/ISO standards, or the rulings of Kazakhstan's State Revenue Committee. Always confirm HS codes and duty rates with the official customs portal before shipment. Evidence pack reference date: 2026-09-22.
