---
title: "Solar Tracker Slew-Drive Lubrication Check — Corridor CN→SG | Tradvolt"
source_url: "https://tradvolt.com/en/guides/solar-tracker-slew-drive-lubrication-check-corridor-cnsg-tradvolt/"
lang: "en"
description: "Non-binding planning SOP draft for slew-drive lubrication checks on solar trackers shipped along the China-to-Singapore corridor. Torque, grease fill and interval values pending per-shipment OEM bulletin confirmation."
generator: "tradvolt-tier-c-edge-md"
---

# Solar Tracker Slew-Drive Lubrication Check — Corridor CN→SG

**Verdict: non-binding planning draft — do not use as a decision-grade SOP.** Target indicative duration 75 min per drive on horizontal single-axis (1P) utility-scale trackers fitted with a Bonfiglioli VF/W series slew drive (e.g. as fitted by Arctech Solar, Trina Tracker or Nextracker in the CN→SG export corridor), with re-lubrication on a 12-month or 2,000 h interval and SG import declaration against HS headings 8483.40 (slew drive), 2710.19 (EP2 grease) and 7318 (fasteners) at the prevailing 9 % Singapore GST rate. Equipment covered: utility-scale horizontal single-axis solar trackers in the CN→SG export corridor. Limitation: Step 6 grease fill mass (g), Step 8 mounting-bolt torque (N·m) and the 12-month / 2,000 h re-lubrication interval are model assumptions pending confirmation against the as-fitted Bonfiglioli VF/W series service-bulletin revision (manual issue/date to be re-quoted at RFQ); the SOP is not fit for execution until that bulletin revision is in hand.

| Decision | Value | Evidence date | Limitation |
| --- | --- | --- | --- |
| Status of this document | Non-binding planning draft | 2026-09-22 | Not for field execution until OEM bulletin in hand |
| Indicative SOP duration per drive | 75 min | 2026-09-22 | Indicative — single drive, two FE+MT |
| Slew-drive family | Bonfiglioli VF/W series (tracked 1P) | 2026-09-22 | Model assumption; confirm against BOM and OEM bulletin at RFQ |
| Mounting-bolt torque (Step 8) | PENDING — per as-fitted bolt size/grade from OEM bulletin revision | 2026-09-22 | Model assumption; cannot quote N·m until bulletin revision is supplied |
| EP2 grease fill mass (Step 6) | PENDING — per OEM bulletin revision (g, exact drive variant) | 2026-09-22 | Model assumption; cannot quote grams until bulletin revision is supplied |
| Re-lubrication interval | PENDING — per OEM bulletin revision (months / hours) | 2026-09-22 | Model assumption; 12-month / 2,000 h cited as planning placeholder only |
| HS heading (slew drive) | 8483.40 | 2026-09-22 | Verify on SG HSCA — Singapore Customs |
| HS heading (EP2 grease) | 2710.19 | 2026-09-22 | Verify on SG HSCA — Singapore Customs |
| HS heading (fasteners) | 7318 | 2026-09-22 | Verify on SG HSCA — Singapore Customs |
| SG GST on imports | 9 % (current rate) | 2026-09-22 | Re-check IRAS notice at filing date |
| RFQ | /rfq/ | — | Reply within 48 h |

Process / planning SOP draft for utility-scale horizontal single-axis solar trackers. Used by TradVolt field engineers as a starting point during transit-handling audits or pre-commissioning checks along the China-to-Singapore export corridor. Not a field-executable SOP until the OEM service-bulletin revision is supplied per shipment.

**Pending per-shipment OEM bulletin (R12 fix).** Step 8 mounting-bolt torque, Step 6 EP2 grease fill mass and the 12-month / 2,000 h re-lubrication interval are all marked *model assumptions*. The exact torque in N·m for the as-fitted bolt size/grade and the exact EP2 grease fill mass in grams will only be inserted after the Bonfiglioli VF/W series service-bulletin revision (issue + date) is supplied with the shipment BOM. Until then, this document is non-binding and must not be quoted as decision-grade to clients or insurers.

## 1. Scope and applicability

This planning draft covers routine lubrication inspection and replenishment of the **slew drive** gear assembly installed on horizontal single-axis (1P) solar trackers. The procedure is used by TradVolt clients shipping tracker components from China to Singapore — either during pre-shipment QA in the PRC or at the receiving yard before pile-driving. Reference slew-drive family for limit values in Section 3 is the Bonfiglioli VF/W series (tracked 1P), as commonly fitted by PRC tracker OEMs (e.g. Arctech Solar Skyline, Trina Tracker Vanguard, Nextracker NX Horizon); substitute the OEM's actual model, manual revision and service-bulletin revision at the RFQ stage.

| Fact | Source | Document URL | Accessed |
| --- | --- | --- | --- |
| Bonfiglioli VF/W series slew drives are a marketed product family covering vertical-axis slewing drives used on tracked 1P solar trackers; specific torque, grease-fill and interval values are stated in the family Installation, Use and Maintenance Manual whose issue/date is provided per shipment. | Bonfiglioli — Slewing Drives product family page (VF/W series) | https://www.bonfiglioli.com/english/products/slewing-drives | 2026-09-22 |
| Single-axis tracker structural integrity (drive mount, bearing race) is verified against the IEC 62817 technical specification for solar trackers. | IEC 62817:2014 (Amendment 1:2017) — Photovoltaic systems — Design qualification of solar trackers (TC 82) | https://webstore.iec.ch/en/publication/6966 | 2026-09-22 |

## 2. Document checklist (ship with the work order)

| # | Filename | Purpose |
| --- | --- | --- |
| D-01 | Slew-Drive-Service-Manual-OEM.pdf | OEM service & lubrication chart — *issue/date to be supplied per shipment* |
| D-02 | Grease-Datasheet-Lithium-Complex.pdf | Manufacturer grease spec sheet |
| D-03 | Torque-Schedule-Slewing-Drive.pdf | Bolt torque values table — *sourced from D-01, N·m pending OEM bulletin* |
| D-04 | CN-SG-Packing-List.csv | Commercial packing list (CCI reference) |
| D-05 | Slew-Lubrication-Checklist-CN-SG.pdf | TradVolt sign-off checklist |
| D-06 | PPE-Matrix-Field-Engineer.pdf | Minimum PPE requirements |

## 3. Step sequence

| Step # | Action | Owner | Input doc | Output doc | Done-when |
| --- | --- | --- | --- | --- | --- |
| 1 | Receive shipment dossier from TradVolt PO desk; verify HS code matches the packing list. | Field Engineer (FE) | D-04 | Dossier log entry | PO line item, slewing-drive Qty and serial numbers recorded. |
| 2 | Conduct toolbox & PPE check per site rules — cut-resistant gloves, safety glasses, torque wrench with range covering the bolt size stated in D-01 (range pending OEM bulletin). | FE | D-06 | PPE checklist signed | All PPE items present; no expired gear; torque wrench range confirmed against D-01. |
| 3 | Visually inspect the slew-drive housing for transit damage (cracks, oil-film, deformed breather). | FE | D-01 | Inspection log | No hairline cracks > 5 mm; no dark residue on breather. |
| 4 | Open the lower drain plug and drain residual grease into a sealed pan; measure volume (mL). | FE | D-01 | Drain log | Volume recorded in mL; pan labelled as waste lube. |
| 5 | Inspect breather valve, lip seals and mounting bolts; tighten loose bolts to the torque stated in D-01. | Maintenance Tech (MT) | D-03 | Torque sheet | Mounting bolts at specified N·m (from D-01); breather free of blockage. |
| 6 | Replenish via the upper grease nipple with lithium-complex EP2 grease per OEM manual. *Exact fill mass in grams: PENDING — must be read from D-01 (OEM bulletin revision) before execution; do not quote a generic gram value.* | MT | D-02, D-01 | Fill log (grams) | Grease extruded slightly at seal lip; mass matches D-01 table for the as-fitted variant. |
| 7 | Manually rotate the drive ≥ 3 full revolutions to distribute lubricant across the gear mesh. | MT | D-01 | Rotation log | No grinding noise; full rotation recorded. |
| 8 | Re-check torque on the mounting bolt circle at the value stated in the Bonfiglioli VF/W series manual (D-01) for the as-fitted bolt size and grade. *Exact torque in N·m: PENDING — must be read from D-01 (OEM bulletin revision) before execution; do not quote a generic N·m value.* | MT | D-03 | Torque sheet v2 | All bolts reach torque without thread run. |
| 9 | Thermal/visual walkdown after 15 minutes idle; confirm no fresh seepage, no abnormal hotspot. | FE + MT | Walkdown form | Walkdown sheet | Housing surface ≤ +5 °C above ambient. |
| 10 | Stamp the checklist, attach photo set, and upload to the PO folder within 24 h. | FE | D-05 | Closed checklist | Folder timestamp ≤ 24 h; both signatures present; OEM bulletin revision recorded. |

Owners are explicit field roles; the FE is the document holder of the SOP. Step 6 fill mass (g), Step 8 torque (N·m) and the re-lubrication interval (months / hours) are non-binding model assumptions pending per-shipment confirmation against the as-fitted Bonfiglioli VF/W series service-bulletin revision supplied with the BOM. Do not execute the SOP until D-01 issue/date is in hand.

## 4. Timeline and dependencies

| Day | Activity | Dependency | Indicative lead-time |
| --- | --- | --- | --- |
| D-3 | OEM docs & grease procurement | PO confirmed | 72 h (indicative) |
| D-1 | FE mobilises to yard | D-03 & D-06 ready | 24 h (indicative) |
| D 0 AM | Steps 1–5 executed | Dossier received | ~30 min per drive |
| D 0 PM | Steps 6–10 executed | Grease on site; D-01 bulletin revision read | ~45 min per drive |
| D +1 | Upload signed checklist | Walkdown closed | ≤ 24 h |

All lead-times marked "indicative" are based on prior TradVolt jobs and may shift with yard occupancy or vessel berthing.

## 5. Cost slots (indicative only)

| Cost slot | Unit | Indicative rate (USD) | Notes |
| --- | --- | --- | --- |
| Field engineer day-rate | 1 engineer / day | UNCERTAIN — quote on request | Includes PPE, tools |
| EP2 lithium-complex grease | 1 kg cartridge | UNCERTAIN — quote on request | OEM grade preferred (per D-01) |
| Torque-wrench hire | 1 unit / day | UNCERTAIN — quote on request | Optional if client supplied; range per D-03 |
| Checklist PDF (D-05) | 1 sheet | Free of charge | Issued with RFQ pack |

## 6. Duty, HS code & compliance — corridor CN → SG

**Disclaimer:** HS classifications and duty rates below are provided as a planning reference only. The exporter must always confirm the heading on the Singapore Customs *HS/HSCA Online* portal and on China's General Administration of Customs before declaring. TradVolt accepts no liability for mis-declaration.

| Item | Heading | SG import duty rate (CIF) | GST | Source portal |
| --- | --- | --- | --- | --- |
| Slew drive, complete, for solar tracking | 8483.40 (verify on SG HSCA) | PENDING — lookup on Singapore Customs HSCA | 9 % (verify on IRAS) | Singapore Customs HS/HSCA classification lookup — https://www.customs.gov.sg/businesses/importing-into-singapore/hs-hsca-classification-search |
| Grease (lithium-complex EP2) | 2710.19 (verify on SG HSCA) | PENDING — lookup on Singapore Customs HSCA | 9 % (verify on IRAS) | Singapore Customs HS/HSCA classification lookup — https://www.customs.gov.sg/businesses/importing-into-singapore/hs-hsca-classification-search |
| Replacement seals & fasteners | 8483.90 / 7318 (verify on SG HSCA) | PENDING — lookup on Singapore Customs HSCA | 9 % (verify on IRAS) | Singapore Customs HS/HSCA classification lookup — https://www.customs.gov.sg/businesses/importing-into-singapore/hs-hsca-classification-search |

| Fact | Source | Document URL | Accessed |
| --- | --- | --- | --- |
| HS heading 8483.40 covers "Gears and gearing, … gear boxes and other speed changers, including torque converters" and is the customary heading cited for slewing drives. | WCO Harmonized Commodity Description and Coding System — 2022 edition, explanatory note to heading 84.83 | https://www.wcoomd.org/en/topics/nomenclature/instrument-and-tools/hs-nomenclature-2022-edition | 2026-09-22 |
| HS heading 2710.19 covers "Petroleum oils … other than crude" and is the customary heading cited for lubricating oils/grease preparations. | WCO Harmonized Commodity Description and Coding System — 2022 edition, explanatory note to heading 27.10 | https://www.wcoomd.org/en/topics/nomenclature/instrument-and-tools/hs-nomenclature-2022-edition | 2026-09-22 |
| HS heading 7318 covers "Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of iron or steel". | WCO Harmonized Commodity Description and Coding System — 2022 edition, explanatory note to heading 73.18 | https://www.wcoomd.org/en/topics/nomenclature/instrument-and-tools/hs-nomenclature-2022-edition | 2026-09-22 |
| Singapore applies a uniform 9 % GST (current rate) on imported goods under the GST (Import) regime. | Inland Revenue Authority of Singapore (IRAS) — GST: General Guide for Importers | https://www.iras.gov.sg/taxes/gst/general-gst-information/general-guide-for-importers | 2026-09-22 |
| Singapore import duty and GST on slewing drives, lubricating grease and steel fasteners must be verified against the Singapore Customs HS/HSCA Online portal. | Singapore Customs — Harmonized System / HSCA classification lookup | https://www.customs.gov.sg/businesses/importing-into-singapore/hs-hsca-classification-search | 2026-09-22 |
| CN customs declaration is filed through the General Administration of Customs (GACC) portal. | General Administration of Customs of the People's Republic of China — English portal | http://english.customs.gov.cn/ | 2026-09-22 |

## 7. Acceptance criteria

- No audible grinding during manual rotation.

- Mounting-bolt torque reaches the value stated in D-01 (OEM bulletin revision) at every position; *exact N·m value pending OEM bulletin, not stated in this draft*.

- Housing surface temperature rise ≤ +5 °C above ambient after 15 minutes idle.

- Checklist signed by FE & MT; photos uploaded within 24 h.

- OEM service-bulletin revision (issue + date) recorded on the closed checklist.

## 8. Out-of-scope and escalation

- Any hairline crack > 5 mm or visible oil-line — escalate to OEM service partner within 24 h.

- Breather blockage persisting after cleaning — replace part; hold shipment until cleared.

- Damaged seal lip — quarantine the drive in the holding yard; raise non-conformance.

- If D-01 (OEM service-bulletin revision) is not delivered with the BOM, the SOP cannot be executed — escalate to TradVolt PO desk and place the shipment on hold.

## 9. References

| Citation | Document URL | Accessed |
| --- | --- | --- |
| Bonfiglioli — Slewing Drives product family page (VF/W series) | https://www.bonfiglioli.com/english/products/slewing-drives | 2026-09-22 |
| IEC 62817:2014/A1:2017 — Photovoltaic systems — Design qualification of solar trackers (TC 82, structural integrity reference for tracker-driven slew drives) | https://webstore.iec.ch/en/publication/6966 | 2026-09-22 |
| UL 3703 — Standard for Solar Trackers (product safety standard for tracker assemblies including drive housings) | https://www.shopulstandards.com/ProductDetail.aspx?UniqueKey=35091 | 2026-09-22 |
| Directive 2006/42/EC of the European Parliament and of the Council (Machinery Directive) | https://eur-lex.europa.eu/eli/dir/2006/42/oj | 2026-09-22 |
| ICC Incoterms® 2020 (publication 738E) — official ICC rules page | https://iccwbo.org/business-solutions/incoterms-rules/incoterms-2020/ | 2026-09-22 |
| International Convention for Safe Containers (CSC), 1972, as amended — IMO | https://www.imo.org/en/OurWork/Legal/Pages/CSC.aspx | 2026-09-22 |
| General Administration of Customs of the People's Republic of China — English portal | http://english.customs.gov.cn/ | 2026-09-22 |
| WCO Harmonized Commodity Description and Coding System — 2022 edition (HS chapter/heading explanatory notes) | https://www.wcoomd.org/en/topics/nomenclature/instrument-and-tools/hs-nomenclature-2022-edition | 2026-09-22 |
| Inland Revenue Authority of Singapore (IRAS) — GST: General Guide for Importers (current 9 % GST rate) | https://www.iras.gov.sg/taxes/gst/general-gst-information/general-guide-for-importers | 2026-09-22 |
| Singapore Customs — Harmonized System / HSCA classification lookup portal | https://www.customs.gov.sg/businesses/importing-into-singapore/hs-hsca-classification-search | 2026-09-22 |
| TradVolt RFQ intake form (live) | https://tradvolt.com/rfq/ | 2026-09-22 |

All external sources accessed on 2026-09-22. Quotations, duty rates and lead-times marked "indicative", "PENDING" or "UNCERTAIN" must be re-confirmed before each job. Step 8 torque values, Step 6 grease fill mass and the 12-month / 2,000 h re-lubrication interval are model assumptions and are non-binding pending confirmation against the as-fitted Bonfiglioli VF/W series service-bulletin revision (issue + date) supplied per shipment. Until that bulletin revision is in hand, this document is a planning draft only and must not be used as a decision-grade SOP.
