How much does it cost to run an appliance?
Three numbers off the appliance label and your electricity bill are enough. This worksheet does the multiplication in the open — and it ships with no pre-filled price, because your tariff is yours.
Electricity is billed in kilowatt-hours: one kilowatt drawn for one hour. So the energy an appliance uses per day is its watts divided by 1,000, multiplied by the hours it runs, multiplied again by its duty cycle — the share of that time it is actually drawing power. Fridges and heaters cycle on and off under thermostats and compressors, so their duty cycle is usually well below 100%.
Leave the tariff blank and you still get the energy figure; the tool will simply withhold cost rather than substitute an "average" price that may be nothing like yours.
Worked examples
- A 100 W load for 10 hours a day at 100% duty: 0.1 × 10 = 1.00 kWh/day. At 0.30 per kWh that is 0.30/day and 9.00 per 30 days.
- A 150 W fridge plugged in 24 hours at a 40% duty cycle: 0.15 × 24 × 0.4 = 1.44 kWh/day. At 0.25 per kWh: 0.36/day, 10.80 per 30 days.
- A 2,000 W heater for 4 hours at 75% duty: 2 × 4 × 0.75 = 6.00 kWh/day. At 0.20 per kWh: 1.20/day, 36.00 per 30 days.
Scope, stated plainly
This tool prices energy. It does not model how much heating or cooling a room needs, how an appliance's draw varies with settings or weather, standing charges, time-of-use bands, or taxes. For an exact bill figure, your supplier's tariff document and a plug-in meter beat any worksheet — including this one.
Method and sources
The method — daily kWh = (watts ÷ 1,000) × hours × duty share — is a direct application of the SI definitions of the watt and the hour (BIPM; NIST SP 811) and of how electricity use is measured in kilowatt-hours (U.S. Energy Information Administration, Measuring electricity). More on how our calculators work.